fruitball
Inactive User
You should be raping the signal in m8..
Have a flick through here: https://www.digitalworldz.co.uk/index.php?threads/286306/
What I always say is make sure mount is dead plumb and then drive motor to reference sat position... Align it and get best possible signal and then nip up all bolts... Move your dish 42E AND THEN 30W or more if you can do it and then check you get signal.. Once on a channel on 30w flex your dish GENTLY up and then down and see if the signal goes up or down.. If the signal dont move your bang on the arc... But if it goes up when your flex it you will need to adjust motor elevation and then dish declination.
Then try on 42e and same again.. basically once you have done this you should be following the arc very precisly and then you will get a nice signal on all sats... You should easily be able to pick up 26e and other sats..... Try getting mbc channels on 26e.. You should get a good sig on them once your dish is lined up.
Let us know how you get on.
The Fruit
Have a flick through here: https://www.digitalworldz.co.uk/index.php?threads/286306/
What I always say is make sure mount is dead plumb and then drive motor to reference sat position... Align it and get best possible signal and then nip up all bolts... Move your dish 42E AND THEN 30W or more if you can do it and then check you get signal.. Once on a channel on 30w flex your dish GENTLY up and then down and see if the signal goes up or down.. If the signal dont move your bang on the arc... But if it goes up when your flex it you will need to adjust motor elevation and then dish declination.
Then try on 42e and same again.. basically once you have done this you should be following the arc very precisly and then you will get a nice signal on all sats... You should easily be able to pick up 26e and other sats..... Try getting mbc channels on 26e.. You should get a good sig on them once your dish is lined up.
Let us know how you get on.
The Fruit
Last edited by a moderator: