Results 1 to 8 of 8

Thread: NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

     
  1. #1

    Unhappy NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

    I have a cloned DM800, on receiving it it crashed, green screen at the point of selecting the type of output I would like,
    I have a dm7000 so thought it was probably just wanting a flash, didnt realise i put an official image in & got eh NO CA Error.
    Down loaded the 2ndstage pack. Started dream up, stared repair tool, selected an image (second stage dm800 62), img too big displayed.
    Press ok, when power up the box i get " integer is too big and it all just sits there.
    What am I doing wrong, feel like a right donut!
    Thanks

  2. #2
    VIP Member
    Join Date
    May 2007
    Posts
    3,139
    DW Cash
    132

    Re: NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

    You needed patched dreamup for clones. Use serial null modem + ethernet cable connected to the reciever. When the box is in Serial mode flash SIM2.01 Bootloader SSL82, you should then be able to flash a new image by web browsing to the IP address on the OLED display.

  3. #3

    Re: NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

    Quote Originally Posted by gsmtech View Post
    You needed patched dreamup for clones. Use serial null modem + ethernet cable connected to the reciever. When the box is in Serial mode flash SIM2.01 Bootloader SSL82, you should then be able to flash a new image by web browsing to the IP address on the OLED display.
    Thanks for the reply, is there a download for this file anywhere? Sorry if a dumb question, trying to find my way....

  4. #4

    Re: NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

    Right then some progress,
    I downloaded OpenPLi-2.betadmsimssl82,
    connected both modem (null) and network.
    started dream up, started repair 800 dragged it over, clicked dream icon, chose flash, selected the nfi image, then powered up the box.
    green bar goes across.
    now display on box shows 192.168.0.21, serial mode.
    I type this IP in to explorer and it wont connect?

    What have I missed?
    **OK found that I need to select the IP in the network connection bit, now flashing firmware...
    Last edited by spagglerock; 3rd August 2011 at 19:24. Reason: found something out

  5. #5

    Re: NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

    Got it booting now
    Only thing is no picture
    I uploaded settings from vhannibal enigma 2 via dreambox edit but cant get a picture?
    DB showing good and LNB 100% on sat,
    did a scan and this failed too?

    Any ideas anyone?

  6. #6
    DW Senior Member pwillo1982's Avatar
    Join Date
    Dec 2008
    Posts
    507
    DW Cash
    48

    Re: NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

    Have you configured the tuner in Settings-Service Searching-Tuner Setup ???

  7. #7

    Re: NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

    Thanks for reply,
    disconnected the power supply that goes to the tuner and straight off it worked.
    I thought it had fallen out when I chewcked the sim version the night before
    DOH!
    Up and away

  8. #8
    Just Registered
    Join Date
    Mar 2012
    Posts
    1
    DW Cash
    25

    Re: NO CA Error, DM800 Clone, SIM 2.01, wont talk to Dream UP, with repair tool...

    could you post the pli image here, i have a similar problem