iHello to you all, now I should know the answers to my problems! I have installed motorised systems twice, I have a technomate 5402hd mk2 with 80cm dish and tm motor pole is set correct longitude and latitude set at 50.3 n and 3.2 w the receiver not been used for 1 year, getting no signal at all changed the cable lnb and f connectors tried rotating dish by motor works fine signal goes up to 90% with 9% quality sometimes signal drop to 37% depending what sat im on,when I turn off lnb signal stays the same so is it me or the box!! when I remove cable from f connector signal stays on 37% is it possible that moisture could have got into the connector on the motor allowing the motor to move but not receive a signal it has been stored in a shed, been on this on and off for two weeks now out of ideas so any help at all would be good.rgds gray