Whats the long number on the toshiba chip? as i got the id dont match so i had to use the TC58NVG0S3ETA00 xm fileGreetings all, Your thoughts on this please.
My new chips arrived and I set about replacing the flash, all seemed to go well with nice clean joints but when I plugged the board back in flash explorer tells me the chip I.D does not match telling me it's 91.
Thinking I'd messed up I carefully removed that chip and tried another, this time the manufacturer did not match, I tried a third and the I.D did not match.
I'm thinking these £0.94 pence chips may be rejects ?
- - - Updated - - -
@Fergalsworld
Did you use hot air and do you know the temperature, I've had some weird stuff happening.
Whats the long number on the toshiba chip? as i got the id dont match so i had to use the TC58NVG0S3ETA00 xm file
Does it say its connected in startup as i had to swap sda and sdl on the board for it to connectThats the same chip in the xml the I.D should be 0xD1 or D1 but after clicking refresh The chip I.D I got was 91 so I'm thinking these chips are fakes / rebranded
was already in the download section
https://www.digitalworldz.co.uk/index.php?resources/2419/
Check post 6 of the thread
i had to swap SCL with SDA to get it to work
I have a new problem now. My computer won't recognize my EZ-USB FX2LP CY7C68013A USB Development Core Board Logic Analyzer EEPROM #1181
I bought it on ebay. I have tried multiple drivers from the cypress site but no good.
In device manager it says it is an "Unknown Device" but anytime I try to install a new driver it says that the driver installed is the best one. Is there anyway to force it to use the new driver?
You should not install the drivers off the cypress site according to the tutI have a new problem now. My computer won't recognize my EZ-USB FX2LP CY7C68013A USB Development Core Board Logic Analyzer EEPROM #1181
I bought it on ebay. I have tried multiple drivers from the cypress site but no good.
In device manager it says it is an "Unknown Device" but anytime I try to install a new driver it says that the driver installed is the best one. Is there anyway to force it to use the new driver?
I borrowed an XP tower and installed Broadcom as I did on the windows 7 machine. When everything installed I ran it to make sure it was working. All ok loading fine.
I then connected the cable with the EZ-USB FX2LP CY7C68013A USB
Still not finding the driver for the device (Unknown Device).
Can anyone send me the correct driver for this device please?
We use essential cookies to make this site work, and optional cookies to enhance your experience.