Zgemma H2H VM setup

GavinDewar17

Inactive User
Joined
May 1, 2017
Messages
4
Reaction score
0
This is my first post so go easy folks

I recently purchased a Zgemma H2H. I flashed it myself with Ipab TV and bought a 12 month VM line (MgCam)

I did a channel search (396 found) and added the line although I am not getting any channels through the line

Why would this be?

Is the Virgin Line dead? If this was the case the search would have found zero channels?

Thanks in advance for any help

Gavin
 

Napster

Global Moderator
Staff member
Moderator
Joined
Aug 12, 2003
Messages
18,694
Reaction score
6,605
Location
Black Country
if it scanned and found 362 channels virgin feed is fine it has to be with your cline, but never looked at that image so have no idea is the camb active
 

GavinDewar17

Inactive User
Joined
May 1, 2017
Messages
4
Reaction score
0
I live in Belfast although EPG is showing as East Midlands. Could this be the issue? How to I change it to Belfast? Thanks again for the help
 

river4ever

river4ever
VIP Member
Joined
Jun 2, 2016
Messages
1,558
Reaction score
1,116
there should be nothing wrong with ipab image as im running it.
when you say mg_cfg is blank do you mean when you ftp to var/key then open mg_cfg file nothing is in it?
also what way have you set line up in newcamd.list file?

do not disclose original detail.
 

Ferret

Administrator
Staff member
Administrator
Joined
Apr 13, 2007
Messages
12,750
Reaction score
6,725
Location
Yorkshire Born & Bred Leeds !
It's blank (mg_cfg)
If it is blank paste this into it

# EMM messages
# 00 dont show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 dont show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 }

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }

# Mapping 18xx
# 00 disable mapping
# 01 map 18xx to 1801
F: { 00 }
 

jfish

VIP Member
VIP Member
Joined
Sep 21, 2007
Messages
2,877
Reaction score
500
I have found oscam to be very stable with vm lines so if mgcamd fails use oscam I have the config files for vm setup
 
TEST
Top