vcc help

[jay007]

trying to set vcc on my dual unlooper. I use rom 11 cards and believe ny settings should be 26/27. Here is results from script


Executing Script: C:\Documents and Settings\Noel\My Documents\Chartman VCC Analyzer v4\Chartman VCC Analyzer v4.xvb
TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 06 00
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 03 00



VCC 20: !!XX!!!!!!!! 6F = 0% FF = 0%
VCC 1F: !!!!XXXXXXXX 6F = 0% FF = 0%
VCC 1E: !!!!!!!!XX!! 6F = 0% FF = 0%
VCC 1D: XX!!!!XXXXXX 6F = 0% FF = 0%
VCC 1C: XXXXXXXX!!XX 6F = 0% FF = 0%
VCC 1B: XX!!XX!!!!XX 6F = 0% FF = 0%
VCC 1A: !!XX!!XX!!XX 6F = 0% FF = 0%
VCC 19: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 18: !!XXXXXX!!XX 6F = 0% FF = 0%
VCC 17: XXXXXXXX!!!! 6F = 0% FF = 0%
VCC 16: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 15: !!!!!!XXXX!! 6F = 0% FF = 0%
VCC 14: XXXX!!!!XXXX 6F = 0% FF = 0%
VCC 13: !!!!XXXX!!XX 6F = 0% FF = 0%
VCC 12: !!XXXXXXXX!! 6F = 0% FF = 0%
VCC 11: XXXX!!XXXXXX 6F = 0% FF = 0%
VCC 10: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0F: !!!!XXXX!!XX 6F = 0% FF = 0%
VCC 0E: XXXX--!!XXXX 6F = 0% FF = 17%
VCC 0D: XXXX!!XXXXXX 6F = 0% FF = 0%
VCC 0C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0B: XXXXXXXXXX-- 6F = 0% FF = 17%
VCC 0A: XX------XXXX 6F = 0% FF = 50%
VCC 09: --XXXXXXXXXX 6F = 0% FF = 17%
VCC 08: XXXXXXXXXX-- 6F = 0% FF = 17%

VCC Ceiling: 00
VCC Floor..: 00

should this read 26 for ceiling and 27 for floor??