Unlooping Rom11

[hnj]

Hi i have an ROM 11 BOD, i have unlooped 3 before with my powersync unlooper, but this one does not seem to work, i have obtained the correct ird from card but after that it does not unlock it says

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Script Error on Line 115
Sc.GetByte: Requested Byte Exceeds Last Read Request

Something like this, any help will much be apprecaited!

thanks

hnj

 

[mansfield]

If you're using the bod script ,have you "my looper" selected in winexplorer ?

 

[hnj]

If you're using the bod script ,have you "my looper" selected in winexplorer ?

i had messed around alot with the VCC and got it unlooped, thanks alot mate

hnj

 

[noodles0800]

can you please send mr the script you used as im having the same problem with an 11 bod card
cheers

 

[tinnycan]

Slowly turn the pot while the card is running, if it stops turn the opposite way. If it dont run turn the pot screw until it runs. You will hit the sweet spot eventually.