rom 11 trouble

[jayja113]

hi guys trying to read my mosc card i get this in nagra

Opening of COM1 was successful

ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50

30 31 31 20 52 65 76 42 30 44 3C

ROM Revision: 011

EEPROM Revision: RevB0D

ProviderID: 00

CamID: 00 00 00 00

Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74

Attempting to login to BD3

BD3 login failed

Reading ROM11 failed

Closing of COM1 was successful



tried running sidewinder i get

cant detect comport may be in use some where else

make sure your card is inserted and loader is powered up

check ports and power and make sure loader is flashed



when i run winex with rom11 unblocker i get

_______________Setting up WinExplorer_________________

Script Error on Line 524

Sc.GetByte: Requested Byte Exceeds Last Read Request



ird = ird + hexstring(Sc.Getbyte(bytes),2)
bytes = bytes +1
if bytes = 19 then
exit do
end if

i run it with mikedata cartmans a86 bod script i get



Card Didn't Response Correctly-Please Reset Your Dual Unlooper By The Reset Button Before Starting The Script Again,Or Your Card MayBe Looped-Check In NagraEdit 4.1

Script Will Now Exit..Oh Dear

Script C:\ladbrokes poker\unlooper\MIKEDATA & CHARTMAN A86 AND BOD SCRIPT MAY 2007 A86.xvb Transmission Completed



any help plz guys am really stuck now thx jay
:banana::banana::banana::

 

[dont do it it"ll hurt]

vcc too high or too low is my say

 

[jayja113]

vcc too high or too low is my say

how do i check if my vcc is to high or low m8 jay

 

[jayja113]

how do i check if my vcc is to high or low m8 jay

VCC Ceiling: 20
VCC Floor..: 1A
is that right m8:banana::banana::banana:

 

[benny59]

VCC Ceiling: 20
VCC Floor..: 1A
is that right m8:banana::banana::banana:

looks like your useing the wrong script m8.........{mikedata cartmans a86 bod script}.......A86 is for a r10

 

[basher]

hi same thing just happend to me try re-bootin your pc then try reading the card again ..it worked for me and i unlocked it with sidewinder..give it a go & good luck

 

[jayja113]

have tried that m8 am still getting
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 00
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

was told that because it says revBOD the card is still locked?????
was also told the BD3 KEY is wrong any ideas plz thx bye the way i have the numbers just want to play with the card all the cards i open are saying the same thing i have 6 rom11s that do this thx jay

 

[dont do it it"ll hurt]

use the rom11 unlocker script m8 that card is still locked
vcc looks fine
because you ran a rom10 script you got the error m80 sorry i never noticed till benny59 said

 

[maca]

think that card is softlooped m8 ProviderID: 00 don't look good get yourself another mosc

 

[jayja113]

think that card is softlooped m8 ProviderID: 00 don't look good get yourself another mosc

when i run winex with rom11 unblocker i get
________________Setting up WinExplorer_________________

Script Error on Line 524
Sc.GetByte: Requested Byte Exceeds Last Read Request

 

[benny59]

when i run winex with rom11 unblocker i get
________________Setting up WinExplorer_________________

Script Error on Line 524
Sc.GetByte: Requested Byte Exceeds Last Read Request

Script Error on Line 524 is either a coms error or your unlooper needs flashing

maybe try it on a diffrent pc


you will get the same error if you run winex with the r11 unlocker without the card m8

 

[jayja113]

Script Error on Line 524 is either a coms error or your unlooper needs flashing

maybe try it on a diffrent pc


you will get the same error if you run winex with the r11 unlocker without the card m8

arrrg now i am getting this

________________Setting up WinExplorer_________________

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script


Script Error on Line 396
Sc.GetByte: Requested Byte Exceeds Last Read Request
lol pain the arse thing

 

[benny59]

arrrg now i am getting this

________________Setting up WinExplorer_________________

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script


Script Error on Line 396
Sc.GetByte: Requested Byte Exceeds Last Read Request
lol pain the arse thing

doubt you will get into this card m8, at 1st i thought it might be your setup with the 1st script error and the provider id at 00

Nagraedit only gets the provider ID from the response to a command. If it never gets one back from the card it just defaults to 00.

 

[jayja113]

doubt you will get into this card m8, at 1st i thought it might be your setup with the 1st script error and the provider id at 00

Nagraedit only gets the provider ID from the response to a command. If it never gets one back from the card it just defaults to 00.

ok m8 thx is there anyway of retrieving the card jay