R rev Inactive User Joined Jun 23, 2005 Messages 60 Reaction score 0 May 22, 2007 #1 i have 2 tit2 cards when i try to erase them it comes up no atr does that mean there no good any advice would be greatful thanks
i have 2 tit2 cards when i try to erase them it comes up no atr does that mean there no good any advice would be greatful thanks
M mansfield Inactive User Joined Jan 30, 2007 Messages 224 Reaction score 6 May 23, 2007 #2 have you card programmer set to phoenix mode(3.58) also make sure your serial cable is connected, i have forgot to connect serial cable sometimes , and you will get no atr.
have you card programmer set to phoenix mode(3.58) also make sure your serial cable is connected, i have forgot to connect serial cable sometimes , and you will get no atr.
S sinky50 Inactive User Joined Jan 22, 2006 Messages 267 Reaction score 1 May 23, 2007 #3 Reprogram your card from start with winexplorer should work for you sinky
M mp101216 Inactive User Joined Mar 6, 2005 Messages 176 Reaction score 1 May 23, 2007 #4 I always set my programmer to 3.68. never failed. hope it helps. mp101216
