snmp not a vallied command

[Magnu420]

i come across a better mac then what im using on me 250 using infinite
but when i get to here to change the snmp ie
cd non-vol

cd snmp_cm..... i get a error saying snmp_cm is not a vallied command vol/hal cm...any ideas what im doing wrong,do i need to change the snmp everytime
i want to change the mac or do i bypass this and just change the mac and the usb mac..also it has my own password/username

thanks...

 

[gentlex]

i come across a better mac then what im using on me 250 using infinite
but when i get to here to change the snmp ie
cd non-vol

cd snmp_cm..... i get a error saying snmp_cm is not a vallied command vol/hal cm...any ideas what im doing wrong,do i need to change the snmp everytime
i want to change the mac or do i bypass this and just change the mac and the usb mac..also it has my own password/username

thanks...

just use the ambit tool m8 if u just want to change the macs

 

[Magnu420]

just use the ambit tool m8 if u just want to change the macs

so i dont need to change the snmp seriel number to same as me mac,cos i did it 1st time round change snmp to the same as mac what i was using,and change the mac and the usb mac and away i went,if i dont change the snmp it will be the same seriel as the mac before


thanks..

 

[gentlex]

not 100% sure if its it neccessary @ all, @ lease not if ur in tw anyway!!! to change the serial copy and paste this command

cd non-vol
cd snmp_cm
docsDevSerialNumber xxxxxxxxxxxxxx (replace the x's with the mac ur gonna use
write

then press enter

 

[Magnu420]

not 100% sure if its it neccessary @ all, @ lease not if ur in tw anyway!!! to change the serial copy and paste this command

cd non-vol
cd snmp_cm
docsDevSerialNumber xxxxxxxxxxxxxx (replace the x's with the mac ur gonna use
write

then press enter

thats what been doing and its giving me that error but soon as i enter cd snmp_cm i got the error say its not a vol/haf cm it dont give me a chance to enter docDevSerialNumber
btw im in x c/w

 

[kevdoc]

TRY THIS:

cd/ non-vol
cd/ snmp_cm
docsDevSerialNumber xxxxxxxxxxxxxx (replace the x's with the mac ur gonna use
write

INSTEAD OF:

cd non-vol
cd snmp_cm
docsDevSerialNumber xxxxxxxxxxxxxx (replace the x's with the mac ur gonna use
write

NOTICE THE /

 

[gentlex]

thats what been doing and its giving me that error but soon as i enter cd snmp_cm i got the error say its not a vol/haf cm it dont give me a chance to enter docDevSerialNumber
btw im in x c/w

dont know why it aint working for u m8, r u copying and paste the the whole command into hyperterminal like this???

cd non-vol
cd snmp_cm
docsDevSerialNumber xxxxxxxxxxxx
write

also what stop scan command r u using??? u need to use this

Code:
cd \cm_hal
scan_stop
cd \

to stop the scaning then press enter then then use this command

cd non-vol
cd snmp_cm
docsDevSerialNumber xxxxxxxxxxxx
write

then press enter

 

[Magnu420]

think ive susses it out i was doing each command separatly the entering instead
of doing all the command then entering as gentlex said
will try it later and get back to you


@ kevdoc ive tried both ways

thanks guys will let you know...