smt2100

mark smith

Inactive User
Joined
Apr 23, 2008
Messages
55
Reaction score
0
can this box be modified if so what software will be needed
 

morashid679

Inactive User
Joined
Jan 8, 2008
Messages
770
Reaction score
85
Location
Herts where my home is.
can this box be modified if so what software will be needed

In order to obtain your bk for the box you will need the paired card or a Sammy Jtag cable to dump the ird and boxkey.

When jtagging you need to have mac mot(driver program) running in the backround.

The ird is also obtainable from the nagra serial code in the em or settings menu and then converting the 1st 10 digits to hex.

You can use bke 2.2, Sammy debug tool or OCD commander and depending on what area you are in the relevant bytes.

If required the net id can also be changed with the macro created in bke or SDT then run in OCD.
 
Last edited:

mark smith

Inactive User
Joined
Apr 23, 2008
Messages
55
Reaction score
0
thanks very mutch m8 il try that wen im a bit more advanced im still trying to crack the pace di4010 it went down think it mite be the card but im having trouble with the pheinix card reader carnt get software to work tryd xnis mron caton any help would be greatly apretiated and thanks again .
 

mark smith

Inactive User
Joined
Apr 23, 2008
Messages
55
Reaction score
0
thanks m8 tryd that it just says opening com part 1 failed then loads of ff ff ff ffs im not sure if i should be using something els with nagra
 

morashid679

Inactive User
Joined
Jan 8, 2008
Messages
770
Reaction score
85
Location
Herts where my home is.
thanks m8 tryd that it just says opening com part 1 failed then loads of ff ff ff ffs im not sure if i should be using something els with nagra


Did you make sure the com ports matched in Nagra and it was in win 98 compatibility mode in properties.

When you say phoenix proggy, which 1 do you mean?

Is it the phoenix from Fleet or infinity phoenix?
 

mark smith

Inactive User
Joined
Apr 23, 2008
Messages
55
Reaction score
0
im not sure whitch 1 it is i got it from tailer made circuts thanks for yor help.
 

mark smith

Inactive User
Joined
Apr 23, 2008
Messages
55
Reaction score
0
cheers m8 r these filles in the download sec or will i hav to look round 4 them.
 

mark smith

Inactive User
Joined
Apr 23, 2008
Messages
55
Reaction score
0
thanks for reply m8,yes iv done all that it opens then gives str string then rom revition rev bod then cam date then closing of port 1 succesfull
 

neathdrew

Inactive User
Joined
Oct 26, 2005
Messages
1,459
Reaction score
28
Location
in the pub
thanks for reply m8,yes iv done all that it opens then gives str string then rom revition rev bod then cam date then closing of port 1 succesfull

the card is probably locked u need to glitch it with an unlooper and bod script b4 u can read it....
 

Tesla

Inactive User
Joined
May 4, 2008
Messages
23
Reaction score
1
thanks for reply m8,yes iv done all that it opens then gives str string then rom revition rev bod then cam date then closing of port 1 succesfull

Does it say reading ROM11 failed or post up the Nagra message but XXXXX out your personal details.
 

mark smith

Inactive User
Joined
Apr 23, 2008
Messages
55
Reaction score
0
it says opening com port succesfull , atr string 3f ff and loads of other num, rom revition 011, eeprpm revition rev bo4, set ifs passed , cam id 24 84 ef 2f, using bd3 key then loads of numbers, atemting to login to bd3 , then unable to login bad pasword detected.
 

mark smith

Inactive User
Joined
Apr 23, 2008
Messages
55
Reaction score
0
any ideas on wer to get the glitcher and how to use it m8. and many thanks to guru whos helped me alot
 

mapman

VIP Member
VIP Member
Joined
Apr 13, 2007
Messages
1,561
Reaction score
104
any ideas on wer to get the glitcher and how to use it m8. and many thanks to guru whos helped me alot

you will get from tmc hes on this site post for him and ask
 
TEST
Top