sky uk/irl ready OScam/CCcam dm500 image

[Ten Below]

When I try to flash it with Flash wizard pro, it says the image is too large?

There are versions for both flashwizard & dreamup, look at the original post HERE

 

[muzstar]

Just flashed this image, will give it a whirl. So far so good.

Anyone know if there is a particular channel which is good for updating entitlements?

Is there a guide somewhere on how this was setup and configured. Ideally I'm looking to incorporate a later build of Oscam which supports ecm whitelists?

 

[jfish]

Just flashed this image, will give it a whirl. So far so good.

Anyone know if there is a particular channel which is good for updating entitlements?

Is there a guide somewhere on how this was setup and configured. Ideally I'm looking to incorporate a later build of Oscam which supports ecm whitelists?

I have created a few guides on OSCAM config on a DM500. A quick search will yield results

 

[zaforija]

can i add nlines on this image to i saw one account alredy make in oscam user can i remove that one or i leave that1 and make new one in it .

can u tell me plz how i add new nline for my friend in this image.

 

[zaforija]

can i add nlines in dis image to for my friends

i saw one account alredy in oscam user can i remove that one or i leave it

can you tell me how can i add nlines in dis image i am new to this image plz

i also wana change my port onn this image it shows 10000 port at server config

 

[tony49]

ok lads one thing at a time for me so first how do you setup your dyndns info in this image pls

 

[tony49]

em i cant edit my last post ive sored that out but how do you update epg and check to c what chanels it is geting epg 4

 

[extraspark]

Hello all,
Just tried the image, very stable and happy with it. Just a quick question how do i put a subtilite for the astra into the box and can anybody point me in the direction of obtaining this file thanks.

 

[zaforija]

i hav added 7 nline account in it & box start workig but my box went off after 4 to 5 hours.
i changed 2 dm boxes but facing same problem on that image.
anyone solve this problem or he have same one like me.

 

[extraspark]

Hello all,
Just tried the image, very stable and happy with it. Just a quick question how do i put a subtilite for the astra into the box and can anybody point me in the direction of obtaining this file thanks.

Sorted now. i feel like a right idiot, for asking.

 

[tony49]

rite i put my card in the box with this image all ok as it read all chanels ive portforward 10000 as preset for newcam ive not change anything added some fline in cccam but nothing is showing up or being passed on
in cccam info http://192.168.1.200:16001/activeclients
active clients none
clients none
server 127.0.0.1:10000
shares 127.0.0.1:10000 |newcamd
provider ***
entitlements none
do you hav to hav cccam and newcam forwarded or just newcam or is it cos i put flines in cccam and it needs to be something els ?

 

[Ten Below]

rite i put my card in the box with this image all ok as it read all chanels ive portforward 10000 as preset for newcam ive not change anything added some fline in cccam but nothing is showing up or being passed on
in cccam info http://192.168.1.200:16001/activeclients
active clients none
clients none
server 127.0.0.1:10000
shares 127.0.0.1:10000 |newcamd
provider ***
entitlements none
do you hav to hav cccam and newcam forwarded or just newcam or is it cos i put flines in cccam and it needs to be something els ?

There is no need to forward the newcamd port, all that needs forwarded is your chosen cccam sharing port is you are using it with c/s
Look at the original posts for how to see your cards entitlements ect HERE
You will see your card in cccam info under the servers tab as N 127.0.0.1 10000

 

[tony49]

There is no need to forward the newcamd port, all that needs forwarded is your chosen cccam sharing port is you are using it with c/s
Look at the original posts for how to see your cards entitlements ect HERE
You will see your card in cccam info under the servers tab as N 127.0.0.1 10000

i think this is were im getting a bit lost but would love to understand it so in in cccam info i have server 127.0.0.1:10000 and shares 127.0.0.1:10000 |newcamd but in the oscam or cccam.configs were is it getting the conaction from or 2 cccam or in cccam.cfg do you hav a l line and a n line

 

[Syncron]

oscam used the newcamd protocol
so oscam reads the card
then shares to CCcam via the N line in your CCcam.cfg

 

[firefox1965]

in the conf file....httpallowed = 127.0.0.1, ????????????? you may need to change this addy to suit your router ip addy

 

[jfish]

in the conf file....httpallowed = 127.0.0.1, ????????????? you may need to change this addy to suit your router ip addy

the httpallowed is only used when connecting to the web admin page - not used for connecting to the server itself.

see attached document, will assist in configuring oscam

 

[mannachie]

Does anyone know how to upgrade the Oscam ver used (#4863) to the newer #5983 and where I can get a stable copy of it?

 

[omisho]

Thank you for sharing this image. I have successfully flashed this image and inserted my card but all I have is free view stations. Can you please tell me the step by step actions including how to locate and change any data that will make this functional. Thank you.

 

[omisho]

aAlso how can I get to Oscam web and CCCAM info?. Thanks

 

[tony49]

aAlso how can I get to Oscam web and CCCAM info?. Thanks

in setup dreambox control center go to the ftp look in var/etc for your cccam.cfg then va/tuxbox/config for your oscam info im just having a look at page one

OScam Web info
Code:
http://192.168.1.200:8888 so in your brouser you type 192.168.1.200: then you should c your info only thing to chech is your network if yours is 192.168.1 all is ok if not you will need to change in oscam.conf to http://192.168.0.200:8888 and change it on your dreambox aswell the same in cccam

user - admin (u can change to anything you want)
pass - admin (u can change to anything you want)
CCcam Info
Code:
http://192.168.1.200:16001 or 192.168.0.200
the best thing to do on your dreambox is go to manu syetem setting find the network put a tick in dhcp rebot your box go back in to setting take the tick out so it will keep the same ip look and c what ip it has gave it and change http://192.168.1.200:8888 and 192.168.1.200:16001 to match so 192.168.0.55 would be
192.168.0.55:8888 and 192.168.0.55:16001 thats about the best way i can halp as my spelling is bad so i cant rite what i would like to