You asked how many clines had we running on a dm500, I said none, because I don't have any
as for how many you can run on this image well I don't know
Sent from my ZTE-BLADE using Tapatalk
sky uk/irl ready OScam/CCcam dm500 image
- Thread starter manxspud
- Start date
You asked how many clines had we running on a dm500, I said none, because I don't have any
as for how many you can run on this image well I don't know
Sent from my ZTE-BLADE using Tapatalk
Syncron
Inactive User
- Joined
- Oct 22, 2011
- Messages
- 10
- Reaction score
- 5
this is an image like every other one, the amount of clients it can have is the same as any other image in the sense that it will be decided on a couple of things
the number of clients that the particular card will handle without freezing etc
and your bandwidth, mainly your upload speed
the only difference on this image is that you dont need the cards boxkey,
on boot, oscam starts-reads the card-then CCcam starts and your clients connect.....simple
maybe you can tell us how many clients you can get on there, it will probably be unique to your setup as will everyone elses
the number of clients that the particular card will handle without freezing etc
and your bandwidth, mainly your upload speed
the only difference on this image is that you dont need the cards boxkey,
on boot, oscam starts-reads the card-then CCcam starts and your clients connect.....simple
maybe you can tell us how many clients you can get on there, it will probably be unique to your setup as will everyone elses
Last edited:
on the webif go to control
then u can reboot / restart ur box from webif
as for how many clients then its a case of how long is a piece of string
it all depends on setup
i have seen over 200clients run smooth of 1 white card but that setup is a bit professional and makes full use of control word period which is around 8 sec and cache
then u can reboot / restart ur box from webif
as for how many clients then its a case of how long is a piece of string
it all depends on setup
i have seen over 200clients run smooth of 1 white card but that setup is a bit professional and makes full use of control word period which is around 8 sec and cache
no i just wonderd how many clients who ever was using a dm500 as a server had running smoothly just incase i have to use this image with my dm500,i am using a dm600 at the moment with 17 and all is good but i want to know if 17 would run ok on the 500 thats all lads,I will just have to test and see and when i do i will let you know how i get on.
thanks
thanks
yes csp with radical and tight timing configurations
dm500s will run 30 / 40 clients if its a standalone server but u could run into problems of random pixalation / freezes when more than 16 different channels ar being watched
dm500s will run 30 / 40 clients if its a standalone server but u could run into problems of random pixalation / freezes when more than 16 different channels ar being watched
cupra.john
DW Member ++
this shoud work just a server right, as i have an old 500c in my loft
cupra.john
DW Member ++
brillant now flashing, my front room now looks like some mad experiment
Its ok I have found it.
1. Open up the Oscam info by typing in ur server ip followed by 8888 so http://192.168.1.xxx:8888
2. At the top, click on 'READERS'
3. Click on the button I have highlighted as above to show entitlements.
Job doneroud:
1. Open up the Oscam info by typing in ur server ip followed by 8888 so http://192.168.1.xxx:8888
2. At the top, click on 'READERS'
3. Click on the button I have highlighted as above to show entitlements.
Job done
roud:OK, the last thing I want to do with this image is be able to access the oscam info file remotely, using my dyndns addy to do so. I have set port forwarding in my router for port 8888 but get 'The Website declined to show the webpage'
It mst be something I have to add in the oscam.cfg file???
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,xxx.xxx.x.x-xxx.xxx.xxx.xxx
# protocols
[newcamd]
key = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
port = 10001@0963:000000
#### linuxsat-support.com ###
It mst be something I have to add in the oscam.cfg file???
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,xxx.xxx.x.x-xxx.xxx.xxx.xxx
# protocols
[newcamd]
key = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
port = 10001@0963:000000
#### linuxsat-support.com ###
[webif]
httpport = 8888 (change default port)
httpuser = admin (change defaults)
httppwd = admin (change defaults)
httpallowed = 127.0.0.1,xxx.xxx.x.x-xxx.xxx.xxx.xxx your dns / ip of remote computer
u should never use default pass / username or ports
if u do then u are asking for trouble
httpport = 8888 (change default port)
httpuser = admin (change defaults)
httppwd = admin (change defaults)
httpallowed = 127.0.0.1,xxx.xxx.x.x-xxx.xxx.xxx.xxx your dns / ip of remote computer
u should never use default pass / username or ports
if u do then u are asking for trouble
Similar threads
