Sammy 2110 paired card.

morashid679

morashid679

Inactive User
Joined
Jan 8, 2008
Messages
770
Reaction score
85
Location
Herts where my home is.
The card states status OK in the em and now after I put it through sidewinder and ran it on xncs it gave me this,

Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E415350303131205265764230443C
Info=DNASP011 RevB0D
Retrieving card info...
Send_Iso: Error!
Send_Iso: Error!
Send_Iso: Error!
Card info retrieved :)
Installing ghost provider...
1.Dumping dataspace...
Send_Iso: Error!
Send_Iso: Error!
Send_Iso: Error!
Send_Iso: Error!
Send_Iso: Error!
Error dumping dataspace...
Error Installing Ghost...

What does this mean.
 
the card is locked mate....you need to buy an unlooper to unlock the card, then recieve the details from the card

Dabest57
 
Still need help please.

morashid679 said:
The card states status OK in the em and now after I put it through sidewinder and ran it on xncs it gave me this,

Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E415350303131205265764230443C
Info=DNASP011 RevB0D
Retrieving card info...
Send_Iso: Error!
Send_Iso: Error!
Send_Iso: Error!
Card info retrieved :)
Installing ghost provider...
1.Dumping dataspace...
Send_Iso: Error!
Send_Iso: Error!
Send_Iso: Error!
Send_Iso: Error!
Send_Iso: Error!
Error dumping dataspace...
Error Installing Ghost...

What does this mean.
Click to expand...


What do I need to do know?

I have the Tiny unlooper from Fleet.
 
Glitch Delay = 00E9
VCC = 30
Glitch Type = 0A

-----

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Script Error on Line 176
Sc.GetByte: Requested Byte Exceeds Last Read Request

bytes = sc.getbyte(1)

This is what i get, nothing else happens.
 
how do I change it?

I've run VCC analyzer it says

Executing Script: C:\Documents and Settings\Mamun\Desktop\Tiny\Chartman VCC Analyzer v4.xvb
TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 02 00
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 02 00

VCC 20: ????????XX?? 6F = 0% FF = 0%
VCC 1F: ??XXXX??XX?? 6F = 0% FF = 0%
VCC 1E: ????XX

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 1 Bytes Read, Continuing Script
XX

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
???? 6F = 0% FF = 0%
VCC 1D: ????????--

Sc.Read: Timeout Reading Data From Card - 5 Bytes Requested, 3 Bytes Read, Continuing Script

Script Error on Line 82
Sc.GetByte: Requested Byte Exceeds Last Read Request3




VCC 20: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 19: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 18: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 17: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 16: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 15: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 14: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 13: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 12: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 11: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 10: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 09: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 08: XXXXXXXXXXXX 6F = 0% FF = 0%

VCC Ceiling: 00
 
Last edited:
MIKEDATA DUAL UNLOOPER AND CHARTMAN WIZARD UNLOOPER SCRIPT VER 2.0 ROM10 REV A86 AND ROM11 BOD

The Current IRD On The Card Is:9D9DCD45

===Here-We-Go-Again===

Your Vcc Should Be Set To 19 Or 1B (Around 1A Is Best)!!!

Start glitching 5401 Rom 11 RevB0D at 18:41:32 31/03/2008
Flash : TINY-ND11XX, Glitch Type : 04-09
Delay : 009E, VCC : 40(~1.2549 Vdc): ----------

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Script Error on Line 150
Sc.GetByte: Requested Byte Exceeds Last Read Request


This says vcc 40, how do I take it down?

I've got the Tiny from Fleet.
 
Last edited:
try tbc a86 script this gives you a vcc reading and you can adjust as you like
turn your screw till it begines to read not sure which way on tiny as i dont have one m8
 
I found 1 in the mosc section and ran it.


This is what i got.

Script Error on Line 524
Sc.GetByte: Requested Byte Exceeds Last Read Request
 
Last edited:
I have run the vcc analyzer and got this.

How do I set the VCC?





Executing Script: C:\Documents and Settings\Mamun\Desktop\Tiny\Chartman VCC Analyzer v4.xvb
TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 02 00
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 02 00

VCC 20: XXXX

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
XXXX

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
XXXX 6F = 0% FF = 0%
VCC 1F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 19: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 18: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 17: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 16: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 15: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 14: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 13: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 12: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 11: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 10: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 09: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 08: XXXXXXXXXXXX 6F = 0% FF = 0%

VCC Ceiling: 00
VCC Floor..: 00
 
are u using mylooper in parameter setting in winexplorer?
 
You must log in or register to reply here.

Similar threads

C
2110 rom11 problems
Replies
5
Views
657
dont do it it"ll hurt
dont do it it"ll hurt
darrenw
MOSC card problems
Replies
11
Views
2K
chookey
chookey
cfw69
rom 11 rev BO4 help
Replies
13
Views
2K
dont do it it"ll hurt
dont do it it"ll hurt
W
bad password detected
Replies
3
Views
882
waqaszaib
W
marra
1st mosc
Replies
2
Views
251
marra
marra
Back
Top