rom 11 rev BO4 help

cfw69

cfw69

Inactive User
Joined
Dec 6, 2008
Messages
306
Reaction score
1
Location
some where in scotland
hi all
trying to do a mosc card for a box for a freind but when i wight the image to the card & put it the box i get nothing but the free channels but this is where i get lost because when i started the card was a rom11 rev bod but after its been in the box its rev as changed & is now a rom11 rev BOE & now i cant read the card our wight to the card have done this 3 time now with the same thing happing to 3 cards lol
this is wot nagra says
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 45 3D
ROM Revision: 011
EEPROM Revision: RevB0E
ProviderID: 54
CamID: 24 77 90 22
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

have tryed looking for paswords with no luck all i could find was this EDCA5E00112233445566778899EDCA5E or is it EDCA5E11223344556677889900EDCA5E which did not work
have also tryed xncs with no luck just get this
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E415350303131205265764230453D
Info=DNASP011 RevB0E
Retrieving card info...
then a pop up saying access violation at address 0048e4ef in module xncs18~1.exe read of address0000000000.
can anyone tell me where iam going wrong our iam fu***d
 
If you have the BK and IRD Then just mrom the fooker and start again
 
tryed that just get
resetting the card ok
sending string 1....ok
sending string 2....shit
also tryed cardtolls v1.5 & get
resetting the card ok
sending string 1....ok
sending string 2....erro
 
Last edited:
get the box key by using sidewinder bk extractor and then run d2c script by edcase or bk fixer script in winex should work!!

pm me if u need the winex script 2 get boxkey jay.
 
Last edited:
cfw69 said:
hi all
trying to do a mosc card for a box for a freind but when i wight the image to the card & put it the box i get nothing but the free channels but this is where i get lost because when i started the card was a rom11 rev bod but after its been in the box its rev as changed & is now a rom11 rev BOE & now i cant read the card our wight to the card have done this 3 time now with the same thing happing to 3 cards lol
this is wot nagra says
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 45 3D
ROM Revision: 011
EEPROM Revision: RevB0E
ProviderID: 54
CamID: 24 77 90 22
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

have tryed looking for paswords with no luck all i could find was this [highlight]EDCA5E00112233445566778899EDCA5E this one[/highlight]or is it EDCA5E11223344556677889900EDCA5E which did not work
have also tryed xncs with no luck just get this
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E415350303131205265764230453D
Info=DNASP011 RevB0E
Retrieving card info...
then a pop up saying access violation at address 0048e4ef in module xncs18~1.exe read of address0000000000.
can anyone tell me where iam going wrong our iam fu***d
Click to expand...


first one.

after you run d2c in nagra and it asks for password, are you re-entering password..EDCA5E00...? it will show as already there but it needs entering again.
 
In nagra click on the blue key logo at the top.The password is all DDD's.
Then read as normal

Chookey
 
You must log in or register to reply here.

Similar threads

S
help to understand log
Replies
1
Views
790
acebing
A
jspk
N3 extract
Replies
18
Views
4K
hamo barca
H
bilabonic
Help - getting BK from A16 Rev Card ? Backdoor Password ??
Replies
4
Views
6K
immz1
I
B
what does this mean?? using nagra
Replies
6
Views
997
havelln
H
athfc
help readin rom card
Replies
7
Views
726
Teeny
Teeny
Back
Top