hi,
okay ive managed to unlock my original card revb0c with a t911 and the multi script which worked very well, unlocked in 1hour. Then i read the card in nagra and it read 100% complete etc, great!
So I tried writing an revb04 au ex-c&w image in nagra and it failed (tried it 2 or 3 times). So moved over to rom studio and it read and wrote to the card successfully, I used the blank image and didnt change anything (im following a tut). However now it wont read in either program without asking for the bd0 password which I don't know what it is. I've tried all 8's and all 0's but it wont have it. I've also tried xncs to open, but no joy!
nagra dump:
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 34 4C
ROM Revision: 011
EEPROM Revision: RevB04
ProviderID: 5C
CamID: CC CC CC CC
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful
xncs dump:
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E415350303131205265764230344C
Info=DNASP011 RevB04
Retrieving card info...
Card info retrieved
Dumping card,try #0.
Dumping card,try #1.
Dumping card,try #2.
Dumping card,try #3.
Couldnt Dump Card...
rom studio just asks for a bd0 password straight away.
ive tried using busted also but that didn't help it. anyway i can get the bd0 from the image i used? (have attached).
any ideas??? im pulling my hair out over here been working on this for 5hours straight, thought I was so close to getting the channels.
okay ive managed to unlock my original card revb0c with a t911 and the multi script which worked very well, unlocked in 1hour. Then i read the card in nagra and it read 100% complete etc, great!
So I tried writing an revb04 au ex-c&w image in nagra and it failed (tried it 2 or 3 times). So moved over to rom studio and it read and wrote to the card successfully, I used the blank image and didnt change anything (im following a tut). However now it wont read in either program without asking for the bd0 password which I don't know what it is. I've tried all 8's and all 0's but it wont have it. I've also tried xncs to open, but no joy!
nagra dump:
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 34 4C
ROM Revision: 011
EEPROM Revision: RevB04
ProviderID: 5C
CamID: CC CC CC CC
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful
xncs dump:
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E415350303131205265764230344C
Info=DNASP011 RevB04
Retrieving card info...
Card info retrieved
Dumping card,try #0.
Dumping card,try #1.
Dumping card,try #2.
Dumping card,try #3.
Couldnt Dump Card...
rom studio just asks for a bd0 password straight away.
ive tried using busted also but that didn't help it. anyway i can get the bd0 from the image i used? (have attached).
any ideas??? im pulling my hair out over here been working on this for 5hours straight, thought I was so close to getting the channels.