Removing glued gripper rod

[Donnie Darko]

I need to remove evo-stik'd gripper rods from a ceramic tiled floor,any ideas.

 

[Jackel]

Try a heat gun and wallpaper scraper Donnie. Then tidy up with meths or white spirit.

 

[Donnie Darko]

Try a heat gun and wallpaper scraper Donnie. Then tidy up with meths or white spirit.

Ta will give it a go,just discovered this floor under hall carpet,looks smart victorian mosaic style and in good nick from first impression.

 

[MFCGMFC]

in keeping with current threads mate

just pull it and it'll come


just run a paint scrapper under it mate or a blade of some sort


Cheers
MFCGAVMFC

 

[Jackel]

Yes i would try to keep hold of that if you can mate.

 

[Paul-K]

Ta will give it a go,just discovered this floor under hall carpet,looks smart victorian mosaic style and in good nick from first impression.

Get some photo's up of them if you can m8..

 

[Donnie Darko]

Taken off fone,flloor covers area roughly 3 ft x 20ft L shaped

 

[gasman]

Taken off fone,flloor covers area roughly 3 ft x 20ft L shaped

If the grippers hang on a bit just as mentioned get a bit of heat on em and they will give up the fight.
Now who's is that manky set of toes in the pic ?????

 

[Jooooles]

Taken off fone,flloor covers area roughly 3 ft x 20ft L shaped

use a wallpaper steamer to clean the tiles and get rid of guey bits then scrap the old groat out re groat it and it will look mint m8

 

[dogtoffee]

soak in solvent for around an hour before trying to remove m8

 

[Jooooles]

scrape the old grout out not groat is this somone messing with my english skills lol :Clap: