Hey guys
I have tried to fix this box of mine before and gave up twice because no one and I mean no one can explane to me how my Orange nexus T911 works.
So I have flashed the chips on it. That went well. Then I installed sct10en.exe that I think went ok. Then I run WinExplorer and used the keygen to get it working. Once working I selected my T911 from the drop down menu and opened a script. By the way I have a phoenix card reader and a nexus due to the fact that i do not have a clue what I am doing and was convinced that i had brought the wrong thing to start with. So if it is easier with one or the other please let me know. When I tried to open the card with Nagra edit it says this:
ROM Revision: 011
EEPROM Revision: RevB0D
CAM Date: 1F68
Closing of COM1 was successful
So it must be a ROM11 and the script that I was using was “5C01 Rom11 BOC”. But once I run the script after about 5 seconds I get a error message saying:
Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
Script Error on Line 150
Sc.GetByte: Requested Byte Exceeds Last Read Request
In the top right section of the window it shows where in the script it stopped and this is what that part says:
Bytes = Sc.Getbyte(1)
if Bytes > 8 then
Sc.Read(11)
'bytes=sc.getbyte(8)
'PRINT HexString(bytes, 2)
end if
Please, please can some one help me out with this? It’s driving me nuts.
I have tried to fix this box of mine before and gave up twice because no one and I mean no one can explane to me how my Orange nexus T911 works.
So I have flashed the chips on it. That went well. Then I installed sct10en.exe that I think went ok. Then I run WinExplorer and used the keygen to get it working. Once working I selected my T911 from the drop down menu and opened a script. By the way I have a phoenix card reader and a nexus due to the fact that i do not have a clue what I am doing and was convinced that i had brought the wrong thing to start with. So if it is easier with one or the other please let me know. When I tried to open the card with Nagra edit it says this:
ROM Revision: 011
EEPROM Revision: RevB0D
CAM Date: 1F68
Closing of COM1 was successful
So it must be a ROM11 and the script that I was using was “5C01 Rom11 BOC”. But once I run the script after about 5 seconds I get a error message saying:
Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
Script Error on Line 150
Sc.GetByte: Requested Byte Exceeds Last Read Request
In the top right section of the window it shows where in the script it stopped and this is what that part says:
Bytes = Sc.Getbyte(1)
if Bytes > 8 then
Sc.Read(11)
'bytes=sc.getbyte(8)
'PRINT HexString(bytes, 2)
end if
Please, please can some one help me out with this? It’s driving me nuts.
Last edited: