Nokia dbox not flashing

P

philburn

Inactive User
Joined
Mar 2, 2007
Messages
14
Reaction score
0
Location
UK
I am unable to flash a nokia dbox with IFA. I have tried hyperterminal, with just serial and it goes through the process and looks complete, but when box booted, it gets to lade screen and keeps resetting.

The log from IFA is as follows. Any insight much appreciated.

T T ïdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 00
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:11:f6:66
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.75, My IP 192.168.1.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 00
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:11:f6:66
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.75, My IP 192.168.1.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 00
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:11:f6:66
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.75, My IP 192.168.1.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 00
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:11:f6:66
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.75, My IP 192.168.1.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.75; our IP address is 192.168.1.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

------ Extra Informations ------
Selected Network adapter: Intel(R) PRO/100 VM Network Connection - Packet Scheduler Miniport (0)
IP-Adress of the Network Adapter: 192.168.1.75
IP-Adress of the Dbox: 192.168.1.202
Comport: Communications Port (COM1)
Operatingsystem: Microsoft Windows XP Professional Service Pack 1 (Build 2600)
CPU 1: Intel(R) Pentium(R) III Mobile CPU 866MHz @ 83 MHz
Filename of the Images: Commando_laid_bare_2xI.img
Imagetype: Two Flashs
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------
 
Only one tiny detail I can spot, and this is your target Image. Avoid long file names and intricate paths. Copy this image 'as' CLB2X.IMG to C:\ (ie the root of your boot drive), then try again. Patience haveth virtues with IFA...

Cheers- AL
 
I will try both of the above posts and get back, Many thanks for your input.
 
Dont know if this helps but have you tried just ftp'ing an image into your temp folder and flashing it like that always worked for me saves piddling about with cables as well if you have wifi.
 
Brenussat said:
Dont know if this helps but have you tried just ftp'ing an image into your temp folder and flashing it like that always worked for me saves piddling about with cables as well if you have wifi.
Click to expand...
The box only boots to the lade screen then resets so ftp is not possible.

@philburn
As Devilfish has suggested try a earlier version of IFA 1.5.6 maybe and a different image.
 
Oh right. sorry, still got loads to learn myself yet.
 
I just flashed the andomeda_v1_Nokiax_2x image, big thanks to xenafan and his hard work, to my dbox2 about an hour ago using the prog off the link

[DLMURL]http://www.dboxservice-hallenberg.de/freedownloads.php[/DLMURL]

Just had a null modem cable as you don’t need anything else and followed the process described in the uploaded doc and it went like a dream.

Make sure that your box is off and only switched on when you have hit start button in image flash.

You should see in your box display that it is flashing.

When completed you see flash done in display and just click ok in image flash window. 21/2 mins is all it took.

Switch box off and then reboot the box.

Job done and andomeda_v1_Nokiax_2x image is up and running and looks good.


DBOX must be in Debug Mode already!!!
Turn off DBOX
Start Application
Choose Drive where you have the Image you want to flash
Choose the right network Card where the DBOX is connected to
Choose if you have a null modem Cable and what Com Port ( this is set to no & is correct)
Click Start
On Windows XP SP2 you now need to click unblock
Power your Box up and the Software does the Rest
Display will say Flashing whilst Software is transferred and then Flashing Done after about 2 1/2 Minutes.
 
Last edited by a moderator:
Sorry folks lol that is a crossover cable not a null modem, you don't need a null modem and that is why

Choose if you have a null modem Cable and what Com Port ( this is set to no & is correct)
 
You must log in or register to reply here.

Similar threads

wolftje
Excellent cobra usb tutorial (copied TEXT, not made by me)
2
Replies
21
Views
8K
dibbers
dibbers
P
How to set up your new Vu+Duo. with ViX
Replies
2
Views
21K
cactikid
cactikid
digidude
Nfs and debug mode?
Replies
0
Views
84
digidude
digidude
digidude
rebuilding linux kernels and more tutorials
Replies
12
Views
203
digidude
digidude
P
dbox just fainted and wont come round
Replies
18
Views
2K
phezo
P
Back
Top