Ive been haveing trouble with a nokia dbox 2x for a couple of weeks now,i have flashed it with numerous different
versions of software sportster,boxcracker,zorg etc.
when it flashes everything is fine but after 2 or3 reeboots it just hangs as to what i call "green screen".
I am using IFA2 with a networklead and a null modem lead everything looks to run ok,but the only thing that worries me
is something thats mentiond in the log of IFA2,"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***"
i have highlighted it in red in the log posted below is the CPU knackerd? or does anybody have any idieas as to whats wrong?
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 10.94.54.5, My IP 10.94.54.202
debug: Sending TFTP-request for file I/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename 'I/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename 'I/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit
Size: 8192 kB in 71 Sectors
Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
dbox2 - ImageFlashingAssistent
- Hallenberg.com -
Wilkommen auf ihrer dbox2
Starte Backup....
Schreibe Backup: 8064k von 8064k (100%)
Backup abgeschlossen!
Der Flashprozess wird nun gestartet...
Lösche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)
Flashen beendet!
Sie koennen die dbox jetzt ausschalten.
Please press Enter to activate this console.
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport (1)
IP-Adresse des Netzwerkadapters: 10.94.54.60
IP-Adresse die die dbox bekommt: 10.94.54.202
Comport: Communications Port (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2920 MHz
CPU 2: Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2920 MHz
Dateiname des Images: Sportster_2005_2x.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.0
------ Powered by http://www.dboxservice-hallenberg.de ------
p.s i have flashed a few other dboxs the excact same way with no trouble.
versions of software sportster,boxcracker,zorg etc.
when it flashes everything is fine but after 2 or3 reeboots it just hangs as to what i call "green screen".
I am using IFA2 with a networklead and a null modem lead everything looks to run ok,but the only thing that worries me
is something thats mentiond in the log of IFA2,"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***"
i have highlighted it in red in the log posted below is the CPU knackerd? or does anybody have any idieas as to whats wrong?
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 10.94.54.5, My IP 10.94.54.202
debug: Sending TFTP-request for file I/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename 'I/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename 'I/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit
Size: 8192 kB in 71 Sectors
Using SCC ETHERNET device
TFTP from server 10.94.54.5; our IP address is 10.94.54.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
dbox2 - ImageFlashingAssistent
- Hallenberg.com -
Wilkommen auf ihrer dbox2
Starte Backup....
Schreibe Backup: 8064k von 8064k (100%)
Backup abgeschlossen!
Der Flashprozess wird nun gestartet...
Lösche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)
Flashen beendet!
Sie koennen die dbox jetzt ausschalten.
Please press Enter to activate this console.
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport (1)
IP-Adresse des Netzwerkadapters: 10.94.54.60
IP-Adresse die die dbox bekommt: 10.94.54.202
Comport: Communications Port (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2920 MHz
CPU 2: Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2920 MHz
Dateiname des Images: Sportster_2005_2x.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.0
------ Powered by http://www.dboxservice-hallenberg.de ------
p.s i have flashed a few other dboxs the excact same way with no trouble.