New T911 Flash problem

[calhordas]

Hi peps i recently bought a T911 from DSSSTUFF and i am now trying to flash it using the flash files from Chriz2000

but i have some few problems which i did not find the ansewers yet in the post made in the forum, or perhaps i did not search hard enough.

first things first

1 - no jumper on the back near power cable
2 - i can see inside the body case from t911 that there is a jumper that possibly can be removed, but i did not do it yet

3- tried flashing it with flash file from chirz2000 but the following error ocurred which i will post on picture, it saying cannot find "unable to find all the hex files for d11.hex"
Can it possibly be a file missing or the jumper inside the case that needs switched?

Sorry to be doing all this dumb questions as i just go it today and don't want to be doing errors that will end up in a dead device.

also from some pics i've seen in the forum, it seems that my t911 is not moded and that some welding will be required and some tracks cut on the t911.

any advice would more then welcome.

i tried to email the chaps from where i bought it from asking if t911 was modded but so far no reply.

 

[einstein]

There should be six little switches next to the serial cable port and one switch next to the power socket. These are the jumpers that you are asking about.
As to modding your t911 search and you will find how to

 

[calhordas]

t911 problem

i have the 6 switches on my t911 , but i do not have the switch near the power supply.

1 - i have now managed to flash my t911 with D11 Flash with no problems.

2 - But i cannot flash the D11.HEX , because it is not included the HEX file for D11.HEX and also missing is the exe.eeprom.hex for the same D11.HEX

these files are missing on chriz2000 tutorial


anyone knows where i can get as i've tried on the search bar and could not find them.

 

[einstein]

Here You Go M8

 

[calhordas]

t911 flashing problem

thanks mate, but thats the one i had
and it's giving me problems

i can flash it with the first D11 and everything goes ok 100% complete.

following the tutorial it states that you should flash eeprom first with D11.HEX, that is the one i can not do it says it cannot find files for it.

But if i step on to step2 to flash the flash with D11 it will allow me to flash everything because the files are supplied in tutorial with the xpatmel, i think this is why i cannot get any rom11 boc, rom10 a82 open.

 

[einstein]

The file I posted contains all the files m8 and all are working properly. The switch that you don't appear to have next to the power socket is important as it needs to be in one position to flash the t911 and in the other position to unlock the cards.

Are you getting any response at all when you try to unlock a card if so what?

Have you found out if your T911 is modded yet?

 

[einstein]

If you read the tut your only supposed to flash your t911 with the d11 and not the d11.hex

 

[calhordas]

t911 problem

Thanks for info as i clearly did not read it properly.

But even so with d11.flashed ok

when i run vcc analizer 2 ceiling 0 floor 0 , that can be right


also when trying to unlock a rom 11 boc , or using rom10 a82 using right scripts fro each, i get this on screen

Executing Script: C:\Documents and Settings\Jackson5\Desktop\Modded T911 Tutorial\Scripts\5401 auto A82_Final Rom 10.xvb
TX Data : A0
TX Data : A1
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 07 1B
RX Data : 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 85 00
RX Data : 12 06
RX Data :

Now we will try 12EF delay
TX Data : B0 99
TX Data : 47 15 E0
TX Data : 21 00 3D A0 CA 00 00 37 03 35 54 01 10 31 05 4E
69 70 50 45 72 20 49 E3 40 7C AD FD B9 64 29 F4
F6 77 C2 35 6D 74 74
TX Data : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 05 CE
TX Data : 0E 05 8A 00
RX Data : 46 00
TX Data : 6A 15 FF 21 00
TX Data : 5C A0 CA 00 00 56 03 54 54 6A 10 81 05 FA CD 7A
TX Data : B7 C0 A1 A6 00 4A 15 33 19 E1 FB 5B 63 48 50 7E
TX Data : 8E 46 A2 1D EF D3 71 16 17 9E 4C 52 66 B6 DB 4C
TX Data : 59 6C D8 6F D9 E7 FF 65 D1 63 8E 1B AE 6D 29 25
TX Data : D9 B8 84 46 ED D9 9E EF 33 A3 A1 6A AD BD F3 46
TX Data : 82 06 67 9C C0 BD 06 F6 85 AE E4 18 76 C9 20 12
EF 09 0E 05 85 00
RX Data : 69 00
RESET
TX Data : 08 0E 03 10 01 01 03 9A 00
RX Data : 08 1B RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET ++ RESET RESET ++ RESET RESET + RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET RESET ++ RESET

 

[einstein]

What position have you got your switches in? if you havent got a switch on its own then there must be a jumper have a good look as you will not be able to glitch your card without changing this

 

[calhordas]

t911 problem

I am using switch 2 and 5 to unlock cards ,

and to flash t911 i used switch 1 and 5 on and it did ok

before i waqs using just switch 1 on all the rest off

Now trying to unlock cards i only use 2 and 5 on .


Shall i try another one?

 

[einstein]

2 & 5 on is correct are you sure you have no other switch or jumper except for the six together?

 

[calhordas]

t911 problem

yes i am shure as i have opened it to look at and i could not find any jumper inside or outside

it was bought from DSSSTUFF.CA

 

[einstein]

Hi m8

I'm afraid i'm not familliar with T911's bought from there might be worth starting a new thread in the general cable section and asking if anyone else has bought one from there.

Were there any instructions with it?

Is it modded?

 

[calhordas]

T911 Problem

Hi to all again

please find attached a photo o the t911 like mine, but with green pcb instead

i Cannot find any jumper inside also

any suggestions?

 

[einstein]

There should be a black switch and a pot where it says sw1

 

[calhordas]

T911 Problem

can we actualy stick one there? and if so does anyone know which pins to weld?

 

[quick_silver]

ur t911 hasn't been modd thats y u have no switch given it a go 2morrow and will write up the tut if i get it to work