am in a pure area , tryin to get a sammy 2100 bk and ird , have read through the thread 3.7 bytes and have tried them all , ird is coming up fine as have checked againt sticker on box and in em , but with all the bytes ive tried the bk is the same , but is not the right one as when written to card only get the free channels also happened on a box i had which i knew the bk for , have tried the following bytes
0x00895934
0x009030c8
0x00902aa4
0x00927fa8
also tried a few c/w ones and still get same result
jtag is connected properly no solder splashes , wires touching , bridging etc
am using bke with mac_mot running
is there a new byte for pure around that i not noticed
thx in advance
0x00895934
0x009030c8
0x00902aa4
0x00927fa8
also tried a few c/w ones and still get same result
jtag is connected properly no solder splashes , wires touching , bridging etc
am using bke with mac_mot running
is there a new byte for pure around that i not noticed
thx in advance