mikeeee321
Inactive User
- Joined
- Mar 5, 2010
- Messages
- 15
- Reaction score
- 0
Hi, everybody
I'm looking for help/suggestions with a zephyr 360 im having trouble jtagging. For starters I know that this version of the zephyr's cb is exploitable. I've done multiple nand reads with no errors and the comparisons were exact. So I went ahead and injected the kv and config files into the zephyr's xbr flashed that. And thought I was done, hooked the 360 up and got a single red light.. error 79 which I know is usually related to the jtag wiring. So i checked and rechecked and even soldered again still had the error. So to make sure there wasn't any write errors I read the nand and compared it with the xbr I created.. Still had an error. I've read that some people needed to use a resister instead of a single wire between pins 7 and 3(i believe are the pins) and still had an error. I've also read that people had luck flashing a falcon xbr to the zephyr, tried that and same error 79. I'm running out of ideas...I've done 4 falcons and 3 xenons with no problems so I don't believe its my wiring. Any suggestions would be welcome and greatly appreciated.
I'm looking for help/suggestions with a zephyr 360 im having trouble jtagging. For starters I know that this version of the zephyr's cb is exploitable. I've done multiple nand reads with no errors and the comparisons were exact. So I went ahead and injected the kv and config files into the zephyr's xbr flashed that. And thought I was done, hooked the 360 up and got a single red light.. error 79 which I know is usually related to the jtag wiring. So i checked and rechecked and even soldered again still had the error. So to make sure there wasn't any write errors I read the nand and compared it with the xbr I created.. Still had an error. I've read that some people needed to use a resister instead of a single wire between pins 7 and 3(i believe are the pins) and still had an error. I've also read that people had luck flashing a falcon xbr to the zephyr, tried that and same error 79. I'm running out of ideas...I've done 4 falcons and 3 xenons with no problems so I don't believe its my wiring. Any suggestions would be welcome and greatly appreciated.