Movie Channels ?
- Thread starter fezzy
- Start date
hi m8,
astra 19.2e premeir and taquila(d+).......
put a link in in for freqs
h**p://www.lyngsat.com/packages/premiere.html
h**p://www.lyngsat.com/astra1kr.html
depending on wat u r using premiere is down on most emus , apparently working on super t rex and diablo cams at the moment
but as stated above taquilla d+ either on 19e or 30w
also cabo on 30w
but as stated above taquilla d+ either on 19e or 30w
also cabo on 30w
Premiere is completely down on emu now. It was good while it lasted.
if you have your dish at 19e astra , if you put the patch on and the latest softcam key or enter the keys manually u will get d+ package with taquilla films and other movie channels along with a variety of othr channels from that package , no need for any other type of cam as the tm patch and softcam will open them
also if on hotbird 13e , there is the tps package and multivision package which also open via the patch
also if on hotbird 13e , there is the tps package and multivision package which also open via the patch
Last edited:
You will also get movie channels on the Cabo package which is on Hispasat 30W.
once u have loaded the patch , via the software tab on the loder to ur reciever , there are two ways of getting the d+ channels , one is via the softcam , which is basically a patch update with just the new keys which u load via the keys tab i think , via the loader
the other way is to manually input them by goin to a d+ channel pressing mute and exit on the remote and the cas menu will appear , u then scroll till it comes up with digital + , if it is a new key 00 then u use lines 10 and 11 to input the keys , if its key 01 , u use lines 20 and 21 to input them , after inputting keys manually press exit then save , channels should then clear
the other way is to manually input them by goin to a d+ channel pressing mute and exit on the remote and the cas menu will appear , u then scroll till it comes up with digital + , if it is a new key 00 then u use lines 10 and 11 to input the keys , if its key 01 , u use lines 20 and 21 to input them , after inputting keys manually press exit then save , channels should then clear
last post in this thread is for the latest d+ keys , which are on astra 19e and also on hispa 30w
http://www.digitalworldz.co.uk/forums/showthread.php?t=109848&page=13
find a channel for example taquilla 1 , then press mute and exit on ur remote
this will bring up the cas menu
find the ident for digital + (4001) the number before the : is the line number to enter the keys ie 10 : 24 3e 56 etc 11 : 0a ef c6 etc
http://www.digitalworldz.co.uk/forums/showthread.php?t=109848&page=13
find a channel for example taquilla 1 , then press mute and exit on ur remote
this will bring up the cas menu
find the ident for digital + (4001) the number before the : is the line number to enter the keys ie 10 : 24 3e 56 etc 11 : 0a ef c6 etc
in the cas menu scroll along until u find nagravision , and the one with digital + is the one u require , taquilla 1 to 8 are part of the d+ package as also are taq x , x , xx . any of those channels will do
check out the listing here for channels and freqs for d+ here
check out the listing here for channels and freqs for d+ here
Code:
You don't have permission to view the code content. Log in or register now.
Last edited:
Treat yourself to a null modem cable and if you don't have a port to fit it, buy yourself a USB/SERIAL ADAPTER. Cheap of fleabay. That way you will be able to put in the latest patch with tps autoupdate.
kardex
marra
Inactive User
multivision and tps (not allways) on 13e also show movies.
some of the canal+ on 19.2e show movies too (with d+ key)
hope this helps
some of the canal+ on 19.2e show movies too (with d+ key)
hope this helps
