mosc help

mickmc68

Premium Member
Joined
Aug 29, 2005
Messages
489
Likes
7
#1
ok here goes i got modded t911 from unapit clear blue one flashed it ok took awhile to find right script but card seems to be unlocked { rom11 rev boc } but cant get any info off it in nagra 4.1 put it back into stb and it comes up com err any help on what im doing wrong would be exellent as my head is melted !! a very big thanx in advance as i know sumbody in here will help yous always do
 

bammy

Inactive User
Joined
Nov 29, 2004
Messages
1,510
Likes
3
#2
If you post exactly what messages come up in Nagra that may give some clue as to the problem. Are you remembering to set your progger into Phoenix mode before you attempt to read the card?
 

mickmc68

Premium Member
Joined
Aug 29, 2005
Messages
489
Likes
7
#3
yes bpening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 00 D0 53 D0 96 28 A6
ROM Revision: 011
EEPROM Revision: .ÐSЖ(
Dataspace pointer is bad - cannot continue
GetCamProvider failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful
ammy set in phoenix mode above is what i get in nagra if that helps
 

carwash

Member +
Joined
Mar 20, 2005
Messages
959
Likes
7
#4
Sorry to be the bearer of bad news m8”! But your card has been looped (((Dataspace pointer is bad - cannot continue)))

No solution for that problem yet”!
 

mickmc68

Premium Member
Joined
Aug 29, 2005
Messages
489
Likes
7
#7
thanx carwash i may get jtag outa draw lol dont suppose if you know if that pogo jtag is any good for a d14010 n ?
 

bammy

Inactive User
Joined
Nov 29, 2004
Messages
1,510
Likes
3
#8
Depends what type of pogo it is - 10 pin type for pace 4000/4010, 20 pin for samsung, some models have both ends to support both types.
 

mickmc68

Premium Member
Joined
Aug 29, 2005
Messages
489
Likes
7
#9
thanx for reply bammy got it sorted ordered interchangable 1 from tmc 10 and 20 pin
 
TEST
Top