liteon ihas firmware its here for you're looking

sargie said:
Ive been bruning newer games m8, gow3, rage, rise of nightmares.. All burned spot on.
Click to expand...

from what i have read the first few xdg3 games did not have the extra civ checks which are located in the extra 3% that is truncated by using the old method so will fail.
 
sorry to ask again but i have flashed my drive checked the box in imgburn about opc am i good to burn or is there anything else i need to do
 
These disc's I can confirm write and verify 100%
Datawrite red tops
windata
tested myself at 4x

its best to set speed at the slowest and move up has these disc mentioned have also wrote and verified at 8x but not all the time.

aone gold write 100% but fail at 49% verify
 
Last edited:
still following the image burn? where it tells you a few errors and that,? haven't wrote one yet, been that busy....
 
Dibbers said:
still following the image burn? where it tells you a few errors and that,? haven't wrote one yet, been that busy....
Click to expand...

There is a new guide that came with the firmware zip file (at the bottom is the imageburn bit)
 
Yeh can comfirm Aone Plus+ burn 100% but fail at 49% Verfy as well
Just ordered some Datawrite red tops will try as they are alot cheaper than verbs
 
yep AONE+ GOLD fail verify halfway for 360 game.

but DL movie burned / verified fine , nice clean burn with this writer / AONE + GOLD. i might try some datawrite as well :)
 
3 xgd2 games in a row burnt with flashed liteon , AOne gold+ discs verified (look) and play fine , perform OTC before write, 4x .. just the gd3's not happening with them.
 
Last edited:
With Aones try using Dvd-decrypter or use mediacodespeededit run it load the burnermax firmware and pick the dye type you're using then edit the ext eg: Aones are Ricohjpn D01 to Ricohjpn Da1 save then flash you're drive with the edited bin. This works for any disc types to enable 2.4x burn this will give you a better burn also use Kprobe2 to see how good the burn was, you are looking for a pi max less than 100 and a pif max less than 7 but set speed to 4x before the test.
 
Last edited:
Goldeneye-redtops@2.4x.PNG
Just burnt this has an example GoldenEye Reloaded with Datawrite Redtops edited from UMEDISC DL1 to UMEDISC Da1 at 2.4x.
 
I cracked it :xmas: Cheers also Formby for pointing me in the right direction ..


Writer: iHas 124b Burner Max.

Datawrite DL Printables the white ones £7.99 for 25.

Disc ID: UMEDISC-DL1-64



Image Burn settings:

OPC ON

Write Speed: 4x (I've stopped verifying now. 10 xgd3 discs burnt verified installed and played no problems).

Burn Proof OFF.

Set buffer to 72MB ...


Drive Settings set with Smart Drive 3.5.5:

Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes.


Maybe worth a try with A-Ones ? Personally I don't need to try to use them anymore as they're roughly the same price as Datawrite's.
 

Attachments

  • SmartBurn3.5.5.rar
    1.1 MB · Views: 38
just got a failed verify? should i try again using what you've posted?



W 16:56:06 Failed to Read Sector 3899769 - Reason: Logical Unit Communication Parity Error
W 16:56:57 Retrying (1)...
I 16:56:57 Verifying Sectors...
W 16:56:57 Failed to Read Sector 3899813 - Reason: Logical Unit Communication Parity Error
W 16:56:58 Failed to Read Sector 3899813 - Reason: Logical Unit Communication Parity Error
I 16:59:19 Exporting Graph Data...





05-11-201116-56-46.jpg
 
Last edited:
Why does it say ATAPI Raid ? Give it a go m8 , post ur log ?
 
it's connected to an old raid card mate as i'm out of sata ports on the mother board...ok shall i try again with smartburn like you posted or should i just ignore the verify? and play any way? ain't tried it in a 360 yet
 
Dibbers said:
it's connected to an old raid card mate as i'm out of sata ports on the mother board...ok shall i try again with smartburn like you posted or should i just ignore the verify? and play any way? ain't tried it in a 360 yet
Click to expand...

make sure when you open imgburn you click on 'run as administrator'

i've been using aone gold edition, white printable discs and been getting 100% burn and 100% verification

also installed 100% to hard drive
 
I would have it through Sata.

What discs , Disc ID ?

If it fails verify it's not done right. ?
 
i can't have it thorugh the onboard sata mate, simply can't only via a sata card (an old one like a via 6421A)

here's a bit more of the log like....
I 15:53:59 Operation Started!
I 15:53:59 Source File: D:\xbox games\gow3\gow.dvd
I 15:53:59 Source File Sectors: 4,267,015 (MODE1/2048)
I 15:53:59 Source File Size: 8,738,846,720 bytes
I 15:53:59 Source File Volume Identifier: DVD_ROM
I 15:53:59 Source File Volume Set Identifier: a2ff4000MS UDFBridge
I 15:53:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 15:53:59 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 15:53:59 Source File File System(s): ISO9660, UDF (1.50)
I 15:54:00 Destination Device: [0:2:0] ATAPI iHAS124 B AL0S (F:) (RAID)
I 15:54:00 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 15:54:00 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x
I 15:54:00 Destination Media Sectors: 4,267,040
I 15:54:00 Write Mode: DVD
I 15:54:00 Write Type: DAO
I 15:54:00 Write Speed: 2.4x
I 15:54:00 Link Size: Auto
I 15:54:00 Lock Volume: Yes
I 15:54:00 Test Mode: No
I 15:54:00 OPC: No
I 15:54:00 BURN-Proof: Enabled
I 15:54:00 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 15:54:00 Book Type Setting: DVD-ROM
I 15:54:00 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 15:54:00 Optimal L0 Data Zone Capacity: 2,133,520
I 15:54:00 Optimal L0 Data Zone Method: Copied From Original Disc
I 15:54:00 Set L0 Data Zone Capacity Succeeded!
I 15:54:00 Filling Buffer... (40 MB)
I 15:54:00 Writing LeadIn...
I 15:54:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 15:54:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 15:54:38 Writing Layer 0... (LBA: 0 - 2133519)
I 16:16:33 Writing Layer 1... (LBA: 2133520 - 4267014)
I 16:38:38 Synchronising Cache...
I 16:38:42 Closing Track...
I 16:38:43 Finalising Disc...
I 16:39:35 Exporting Graph Data...
I 16:39:35 Graph Data File: C:\Users\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_05-NOVEMBER-2011_15-53_MKM-003-00_2.4x.ibg
I 16:39:35 Export Successfully Completed!
I 16:39:35 Operation Successfully Completed! - Duration: 00:45:35
I 16:39:35 Average Write Rate: 3,233 KB/s (2.3x) - Maximum Write Rate: 3,396 KB/s (2.5x)


I 16:39:35 Cycling Tray before Verify...
W 16:39:42 Waiting for device to become ready...
I 16:39:56 Device Ready!
I 16:39:57 Operation Started!I 16:39:57 Source Device: [0:2:0] ATAPI iHAS124 B AL0S (F:) (RAID)
I 16:39:57 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 16:39:57 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8x
I 16:39:57 Image File: D:\xbox games\gow3\gow.dvd
I 16:39:57 Image File Sectors: 4,267,015 (MODE1/2048)
I 16:39:57 Image File Size: 8,738,846,720 bytes
I 16:39:57 Image File Volume Identifier: DVD_ROM
I 16:39:57 Image File Volume Set Identifier: a2ff4000MS UDFBridge
I 16:39:57 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 16:39:57 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 16:39:57 Image File File System(s): ISO9660, UDF (1.50)
I 16:39:57 Read Speed (Data/Audio): MAX / MAX
I 16:39:58 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 16:39:58 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 16:39:58 Verifying Layer 0... (LBA: 0 - 2133519)
I 16:49:12 Verifying Layer 1... (LBA: 2133520 - 4267014)
W 16:56:06 Failed to Read Sector 3899769 - Reason: Logical Unit Communication Parity Error
W 16:56:57 Retrying (1)...
I 16:56:57 Verifying Sectors...
W 16:56:57 Failed to Read Sector 3899813 - Reason: Logical Unit Communication Parity Error
W 16:56:58 Failed to Read Sector 3899813 - Reason: Logical Unit Communication Parity Error
I 16:59:19 Exporting Graph Data...
I 16:59:19 Graph Data File: C:\Users\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_05-NOVEMBER-2011_15-53_MKM-003-00_2.4x.ibg
I 16:59:19 Export Successfully Completed!
I 16:59:19 Operation Successfully Completed! - Duration: 00:19:20
I 16:59:19 Average Verify Rate: 7,363 KB/s (5.3x) - Maximum Verify Rate: 11,262 KB/s (8.1x)
 
Last edited:
You must log in or register to reply here.

Similar threads

O
    • Like
LG smart TVs just added a great free streaming upgrade
Replies
0
Views
153
Oggiman
O
O
    • Wow
    • Like
Virgin Media confirms 8.8% price rise for millions in April
Replies
1
Views
375
Ferret
Ferret
O
    • Like
Virgin Media offer discount to price of bundles
Replies
0
Views
402
Oggiman
O
O
    • Like
BBCiPlayer app for PC blocked from 08/04
Replies
0
Views
174
Oggiman
O
O
    • Like
EPL: Semi-automated offside technology to be introduced for first time next season
Replies
0
Views
137
Oggiman
O
Back
Top