• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

jtag help

cable-bhoy

Inactive User
Joined
Dec 3, 2006
Messages
48
Likes
0
#1
hi can any1 help me im tryn 2 jtag my sammy n*l 2100 wen using bke v2.2 wen its connected i just get the ird +bk is all 00000000000000 any idea guys wat im doin wrong or is conf wrong any help would b great many thaks
 

english

Inactive User
Joined
Mar 14, 2006
Messages
5,571
Likes
99
#2
i'm no expert but it sounds like ur jtag isn't connected properly. from what i gather the wrong bytes just give you the wrong bk/ird?, not all 0's
 

cable-bhoy

Inactive User
Joined
Dec 3, 2006
Messages
48
Likes
0
#4
can any 1 tell me the latest bytes plse i get my ird but bk is al oooooooooooooo many thanx for help guys
 

Nightcrawler1

Inactive User
Joined
Dec 15, 2006
Messages
149
Likes
0
#5
these are what you need ....go into where your bk2.2 is located open it then open the jtag folder alter config 2 to with this

[NTL]
IRD =0x20020004
BOXKEY =0x00f6a8a8

[CW]
IRD =0x20020004
BOXKEY =0x00941464

[PACE]
IRD =0x20040000
BOXKEY =0x20040004

then when you use bk2.2 change setting to config 2 it will then give you the correct numbers you want
 

Loki2409

Inactive User
Joined
May 20, 2005
Messages
40
Likes
0
#11
If your sammy is 3.5L then those byte addresses probably wont work they didn't for me i hunted and found this byte works for sammy 2100 3.5L all areas

0x00564e78

Just thought i would put this up just in case m8