jtag help

cable-bhoy

Inactive User
Joined
Dec 3, 2006
Messages
48
Reaction score
0
hi can any1 help me im tryn 2 jtag my sammy n*l 2100 wen using bke v2.2 wen its connected i just get the ird +bk is all 00000000000000 any idea guys wat im doin wrong or is conf wrong any help would b great many thaks
 
i'm no expert but it sounds like ur jtag isn't connected properly. from what i gather the wrong bytes just give you the wrong bk/ird?, not all 0's
 
can any 1 tell me the latest bytes plse i get my ird but bk is al oooooooooooooo many thanx for help guys
 
these are what you need ....go into where your bk2.2 is located open it then open the jtag folder alter config 2 to with this

[NTL]
IRD =0x20020004
BOXKEY =0x00f6a8a8

[CW]
IRD =0x20020004
BOXKEY =0x00941464

[PACE]
IRD =0x20040000
BOXKEY =0x20040004

then when you use bk2.2 change setting to config 2 it will then give you the correct numbers you want
 
is that correct conf even thou box has bn updated2 virgin
 
If your sammy is 3.5L then those byte addresses probably wont work they didn't for me i hunted and found this byte works for sammy 2100 3.5L all areas

0x00564e78

Just thought i would put this up just in case m8
 
Back
Top