Ire N2 DVB-c Fix

[gersrt]

Hi

As you may know there is now a dreambox n2 fix for Ireland.

As it is open source and the keys are now public, is there any way of getting this fix to run on v-plug or the likes.

Cheers Guys

 

[nozzer]

afaik, if you put the keys into vplug and configure it properly then it will run just fine.

Use VPlug 2.4.2 or later

Enter the Op key as keyindex 00 for provider 5F01
Enter the modulus as keyindex M1 for provider 5F01
Also enter the modulus as keyindex M9 for provider 5F01
If you have the ECM verify key then you can also enter that as keyindex V for provider 5F01. You shouldn't need this though.

In v_emm.ini add the following -

You don't have permission to view the code content. Log in or register now.

In Vplug.ini add the following somewhere in the [main] section

You don't have permission to view the code content. Log in or register now.

you may already have these items added - just edit to include the above values so that N1 (1800) & N3 (1802) are ignored and that the old N1 providerIds (5401, 5501 for exNTL areas) are also ignored.

 

[gersrt]

Cheers Mate.

So I don't need the hypercam then???

 

[nozzer]

Cheers Mate.

So I don't need the hypercam then???

tbh, I didn't know there was a hypercam for the PC.

Vplug will do the job though, as long as its set up to allow it. Not sure about stability as i've only ever tested it "remotely"

 

[despdan]

afaik, if you put the keys into vplug and configure it properly then it will run just fine.

Use VPlug 2.4.2 or later

Enter the Op key as keyindex 00 for provider 5F01
Enter the modulus as keyindex M1 for provider 5F01
Also enter the modulus as keyindex M9 for provider 5F01
If you have the ECM verify key then you can also enter that as keyindex V for provider 5F01. You shouldn't need this though.

In v_emm.ini add the following -

You don't have permission to view the code content. Log in or register now.

In Vplug.ini add the following somewhere in the [main] section

You don't have permission to view the code content. Log in or register now.

you may already have these items added - just edit to include the above values so that N1 (1800) & N3 (1802) are ignored and that the old N1 providerIds (5401, 5501 for exNTL areas) are also ignored.

Another great post nozzer:Clap: if there was a thanks button I would be hitting it:Cheers:
Tried the rep button but won't let me

 

[gersrt]

Another great post nozzer:Clap: if there was a thanks button I would be hitting it:Cheers:
Tried the rep button but won't let me

Hey despdan,

Did you have any luck getting this to work.

 

[despdan]

Hey despdan,

Did you have any luck getting this to work.

Haven't tried it yet maybe later in the week.

 

[gersrt]

im going to try it now myself, do you know where I should put the keys in v-plug.

Cheers

 

[nozzer]

Use the built in editor in Vplugs console (click the icon in the taskbar when vplug is running and then use the "editor" tool) to enter them

 

[gersrt]

Ok Guys,

Thanks for all the help.

Been reading up, and it seems you do not need to mod any files in vplug.

Just create a softcam.txt and import to vplug.

N 5F01 00 xxxxxxxxxx... ; IDEA key00
N 5F01 01 xxxxxxxxxx... ; IDEA key01 here
N 5F01 M1 xxxxxxxxxxxxxxxxxxxx…; for RSA
N 5F01 V 0101010101010101

Reading the hypercam keyfile it seems a bit confusing how to determine the above keys. I take it the rsa key is the really long one, and the others are the shorter keys.

Thanks

 

[nozzer]

Ok Guys,

Thanks for all the help.

Been reading up, and it seems you do not need to mod any files in vplug.

Just create a softcam.txt and import to vplug.

N 5F01 00 xxxxxxxxxx... ; IDEA key00
N 5F01 01 xxxxxxxxxx... ; IDEA key01 here
N 5F01 M1 xxxxxxxxxxxxxxxxxxxx…; for RSA
N 5F01 V 0101010101010101

Reading the hypercam keyfile it seems a bit confusing how to determine the above keys. I take it the rsa key is the really long one, and the others are the shorter keys.

Thanks

There is no Key01, so you can ignore that
Not sure the V key is listed in the hypercam file
IDEA keys are 16 bytes
RSA keys are variable but longer than IDEA keys

The vplug.ini mods I did are to stop Vplug from attempting to lock onto N1 or N3. That used to be a problem on UPC exNTL - Vplug always preferred N1 if it existed !

The v_emm.ini mods were because Vplug never seemed to be able to find the N2 Emm pids without help (fault in the CAT parser). That probably wont matter at the moment anyway as the Emm's aren't used anyway.

 

[gersrt]

Ok Just to let everyone know.

I can confirm this is working, watching Sky Action right now on my htpc.

Using v-plug 2.2.4
Mdapi filter 2009
Mediaportal 1 final.


Thanks for all the help.

If anyone else needs help setting up let me know.:Cheers:

 

[despdan]

Ok Just to let everyone know.

I can confirm this is working, watching Sky Action right now on my htpc.

Using v-plug 2.2.4
Mdapi filter 2009
Mediaportal 1 final.


Thanks for all the help.

If anyone else needs help setting up let me know.:Cheers:

Had a quick look at it today what did you change?

 

[gersrt]

Had a quick look at it today what did you change?

Hi
Despdan

I didn't change anything in the end. I just saved the above as softcam.key with the x's changed to the hypercam keys.

Then used the editor in vplug, imported the softcam.key file I made, pressed convert, and all the channels unlocked.

 

[alec76]

u only need valid op KEY + M1 to get old vplug ecm decrypt working ( up to 2.36 i think)

for the newer vplug u have to alter V key aswell (as there is already wrong V key embedded for 5F01 Provid) + u have to put 1800 CAid on ignore list)