VU+ Solo help to restart a VU + solo with fix red ligth

[cnkastastaxi]

do you now how can I do?

 

[cnkastastaxi]

vu + solo works well until I update image
before 5 minutes it works but a green windows show a message and it start load.
at the end the fornt Ligth doesn't show green colour . it is fix in red .I try to restart with an USB.
thanks

 

[Mygalomorphae]

just bricked mine
whats the fix?

 

[Mygalomorphae]

Im not sure how
I plugged the USB with the image on it but it doesn't boot from it

 

[miguelmare]

Im not sure how
I plugged the USB with the image on it but it doesn't boot from it

# # # - MANUAL like putting new image in your box vu + solo - # # #


1st = Make sure that your USB drive is formatted ( clean ) in fat 32

2 = Open the ZIP / RAR Extract folder and sub ​​- folder VuPlus / soil for your pen drive .

3 = Turn your box the Power button

4 = Target your USB Pen Drive into the front USB input.

5 = VU + Solo Turn the power button on the box

6th = will show an LED lit orange / red.
This means that it is reading the data from the USB key in the buffer .

Then, ...

Will display the LED flashing (flashing ) orange / red.
That means it's now pass data to the receiver .

Wait until the LED changes to a flashing green LED .

When the green LED is blinking (flashing ) , you can turn the receiver on
Power button and remove the USB memory key.

Now turn on the power button again and wait for the
box to start altogether with the following settings AV ,
Time zone , Network , Turner , cams , etc. , etc. , etc. , and after all
configured , you must restart your box to save the settings .

 

[Mygalomorphae]

Ive done that - it doesn't boot from USB (I have 2 other Vu boxes that boot from it fine)
I guess I need to follow this
http://www.digitalworldz.co.uk/download-vu-plugins-582/370094-download-vu-solo-clone.html