These receivers seem to getting more popular as they are cheaper compared to the similarly specc'ed Vu Duo,so heres a brief How-To :
Dummies Guide to setting up Clarke Tech ET9000 HD by Lee
--------------------------------------------------------------------------
1. Install image.
Download a USB image file,
Unzip the ET9000 folder to the root directory of a USB Pen Drive.
Power off Receiver with switch on the back
Insert USB Pen Drive into the USB socket on Receiver
Power on Receiver.
Image Update message will appear on the front display.
Press the OK button behind the front flap.
Image will now install from the USB Stick.
Receiver will reboot once the install is complete.
Image is now installed.
Remove the USB Stick.
--------------------------------------------------------------------------
2. Network
Connect an Ethernet LAN cable from your router to your ET9000 Ethernet port.
Press Menu
Select Set Up Press OK
Select System Press OK
Select Network Press OK
Select Network w i z a r d and press OK.
--------------------------------------------------------------------------
3. How to Setup Motorised Dish using USALS
First get your longitude & latitude info from _http://www.satsig.net/maps/lat-long-finder.htm
Enter your post code into satsig.net and you'll get the correct LON & LAT info for your location.
Example if I enter the following UK postal code: SE1 6JZ into _http://www.satsig.net/maps/lat-long-finder.htm
I get the following LAT & LON:
Latitude: 51.4979°
NORTH
Longitude: -0.1042°
WEST
Press Menu
Select Setup Press OK
Select Service searching Press OK
Select Tuner configuration Press OK
Select Tuner A Press OK
Configuration Mode: Simple
Mode: Positioner
Latitude: 51.497 Press OK
NORTH
Longitude: 0.1042 Press OK
WEST
Press OK to save.
Press Menu
Select Setup Press OK
Select service searching Press OK
Select Positioner Setup Press OK
Select goto 0 Press RED Button
Dish should now goto 1w.
--------------------------------------------------------------------------
4. Upload a Channel List
Download a pre-configured channel list example catseye's
Unzip the Channel List to your local HDD.
Example C:\Catseye E2 Settings File 75 East-58 West
Use ET9000 Control centre to upload channel list to receiver.
Not my work ,all credits to the original author
Dummies Guide to setting up Clarke Tech ET9000 HD by Lee
--------------------------------------------------------------------------
1. Install image.
Download a USB image file,
Unzip the ET9000 folder to the root directory of a USB Pen Drive.
Power off Receiver with switch on the back
Insert USB Pen Drive into the USB socket on Receiver
Power on Receiver.
Image Update message will appear on the front display.
Press the OK button behind the front flap.
Image will now install from the USB Stick.
Receiver will reboot once the install is complete.
Image is now installed.
Remove the USB Stick.
--------------------------------------------------------------------------
2. Network
Connect an Ethernet LAN cable from your router to your ET9000 Ethernet port.
Press Menu
Select Set Up Press OK
Select System Press OK
Select Network Press OK
Select Network w i z a r d and press OK.
--------------------------------------------------------------------------
3. How to Setup Motorised Dish using USALS
First get your longitude & latitude info from _http://www.satsig.net/maps/lat-long-finder.htm
Enter your post code into satsig.net and you'll get the correct LON & LAT info for your location.
Example if I enter the following UK postal code: SE1 6JZ into _http://www.satsig.net/maps/lat-long-finder.htm
I get the following LAT & LON:
Latitude: 51.4979°
NORTH
Longitude: -0.1042°
WEST
Press Menu
Select Setup Press OK
Select Service searching Press OK
Select Tuner configuration Press OK
Select Tuner A Press OK
Configuration Mode: Simple
Mode: Positioner
Latitude: 51.497 Press OK
NORTH
Longitude: 0.1042 Press OK
WEST
Press OK to save.
Press Menu
Select Setup Press OK
Select service searching Press OK
Select Positioner Setup Press OK
Select goto 0 Press RED Button
Dish should now goto 1w.
--------------------------------------------------------------------------
4. Upload a Channel List
Download a pre-configured channel list example catseye's
Unzip the Channel List to your local HDD.
Example C:\Catseye E2 Settings File 75 East-58 West
Use ET9000 Control centre to upload channel list to receiver.
Not my work ,all credits to the original author