• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

DM600 Prob

dazling

VIP Member
VIP Member
Joined
Mar 23, 2007
Messages
1,008
Likes
9
#1
hi all i have just upgraded my DM500 to a DM600 pvr

the problem i have is it will move to 13e and 19.2 no problem but will not go anywere else

im using nabilo image ( have tried loads but this is the only image that i was able to get a pic) and have copied the long and latitude from my dm500 so know that is right i have loaded the captains settings onto it the same as the 500 im switching between cccam 2.09 and mgcamd1.30d.

anybody able to help ?


many thanks
 
Joined
Sep 11, 2007
Messages
276
Likes
5
#2
I'm not saying that this is the problem but this screwed my system up.

When they changed 5.0e to 4.8e and 1w to 0.8w in the later images it sent my motor mad!

I manually changed the satellites.xml back to 1w and 5e,as 4.8e I couldn't even get inter&enter (strong signals)

The only other thing I could think it may be iis the east/west limits have been set wrong.
 

dazling

VIP Member
VIP Member
Joined
Mar 23, 2007
Messages
1,008
Likes
9
#3
I'm not saying that this is the problem but this screwed my system up.

When they changed 5.0e to 4.8e and 1w to 0.8w in the later images it sent my motor mad!

I manually changed the satellites.xml back to 1w and 5e,as 4.8e I couldn't even get inter&enter (strong signals)

The only other thing I could think it may be iis the east/west limits have been set wrong.
thanx will give it a go i have never needed to set up east or west limits on the DM i think my Motor has its own limits,

I have now managed to get back 1w i dont know how lol but done a factory reset on the box then reinstalled the Captains settings and seems to be working a little better although im still not getting ( or seems like ) the sats i was before.