Hi guy`s
My son`s xbox died 3 RROD , so just found him a Jasper and now I need to flash the liteon.
I have read umpteen post on many forums and still a bit unsure .I really want to be 99% before I try to do the liteon ,as I don`t want to brick it so Please if any one can give me details I would be most grateful.
I plan on making a max232 from this diagram
xxtp://beta.ivancover.com/wiki/index...2S_Extract_Key
To build an adapter, these two RS-232 transceivers will work fine:
MAX3232
ST3232
Other required parts are 5x 0.1 uF (1000nF) ceramic or electrolytic capacitors, 1x D-Sub 9-pin female connector, and maybe a 2.54 mm spaced breadboard to mount everything.
I have just got the parts from maplins ,5x 0.1 uF (1000nF) ceramic or electrolytic capacitors, 1x D-Sub 9-pin female connector
I already have a max232cpe ,
I have read many reports that the DIY build with the max232 will do the same job as the build with the max3232 , I need to know 100% if this is true ,and if there could be a greater risk of bricking if I use the 232 rather than the 3232.
I have a conectivity kit V2 and I have also read I can use this in compliance with the DIY max232 by just adding 2 wires.
DIY max232cpe RS232 ————–> Connectivity Kit
Gnd ===================> 1
V + ====================>8
Cable RS232 ————–> Connectivity Kit
Tx ====================> 11
Rx ====================> 12
Sorry for asking all these questions Guy`s ,But I need 99% confirmation that the tools I have now will enable me to do the liteon.
So please if anyone has done this with the setup I propose, could you please sumarize what steps you took (and any important links) for a successful extraction of your Key from the liteon .
Please bear with me, as I have read and read hundreads of posts and tried to siff through many threads on a few forums but , there is lots of conflicting reports so I need like 99% assurity that this will work.
I plan on doing the mod via this tutorial below
hxxp://www.teamxmods.com/xbox360-lit...ment-tutorial/
and add the two extra wires to the conectivity v2 kit ,but will this work? ,
Again I do apoligize for Maybe the same old questions , But if one person could take the time and help to post the details ,I would be extremelly grateful.
Thank you all for taking the time and effort to help out in any way possible.
Regards.
polosolo