herbs
Inactive User
I'd appreciate a bit of help with this if anyone has some time spare please. I'm going round in circles with searches and tutorials, can't find exactly what I'm after and it's difficult going through so much slightly differing content. I haven't used the machine at all for over a year, I flashed it originally, but didn't keep a record of the key. I then gave all the executor bits to someone else who did the most recent flashes for me. I'm lost now, can't remember how I managed to do it before.
I have a Lite-on DG-16D2S 74850C in an xbox from around 2008.
This has whatever the current LT firmware was around 18-24 months ago.
I can play older games, but I'm getting Unsupported Disc with newer titles burnt with Burnermax and Imgburn on Verbs. I do see the thumbnail on the dash.
It's not currently banned and I have the newer style dash.
Years ago I bought an Xecuter CK3 Pro, it has just come back to me. I think it has come back with an extra cable.
The Xecuter bits I have are: the main block with eject button etc, connected is a long black cable with a switch on, and to that a CK3 probe 2. Both the probe and the main bit have a couple of slider switches.
Going in the PC is a VIA VT6421A card.
What I need to know is what to do with the Xecutor bits and Jungleflasher in order to get the key off the drive. From there I'm assuming that I'll be able to use that key and flash the latest LT.
Could anyone point me in the right direction please?
I have a Lite-on DG-16D2S 74850C in an xbox from around 2008.
This has whatever the current LT firmware was around 18-24 months ago.
I can play older games, but I'm getting Unsupported Disc with newer titles burnt with Burnermax and Imgburn on Verbs. I do see the thumbnail on the dash.
It's not currently banned and I have the newer style dash.
Years ago I bought an Xecuter CK3 Pro, it has just come back to me. I think it has come back with an extra cable.
The Xecuter bits I have are: the main block with eject button etc, connected is a long black cable with a switch on, and to that a CK3 probe 2. Both the probe and the main bit have a couple of slider switches.
Going in the PC is a VIA VT6421A card.
What I need to know is what to do with the Xecutor bits and Jungleflasher in order to get the key off the drive. From there I'm assuming that I'll be able to use that key and flash the latest LT.
Could anyone point me in the right direction please?