TheDogs
Inactive User
- Joined
- Aug 15, 2005
- Messages
- 54
- Reaction score
- 2
Hi guys...go a problem with my duolabs cas 3 programer and my millennium card
I plug the serial cable in and the usb and start Cas Interface Studio 8.7 leaving my card out at this point.
Once loaded i select utilities...click ok on the "smart card removed" check....select pheonix the Pheonix @ 3.579 then click hide...i insert my card at this point thenopen Millennium Card Loader-1.0.3
com port selected at com2 and fasr speed selected but then i get this
Resetting Card ...
No ATR from card
any ideas what im doing wrong?
using a serial cable with a gender changer (used this may a time on various cable boxes)
I plug the serial cable in and the usb and start Cas Interface Studio 8.7 leaving my card out at this point.
Once loaded i select utilities...click ok on the "smart card removed" check....select pheonix the Pheonix @ 3.579 then click hide...i insert my card at this point thenopen Millennium Card Loader-1.0.3
com port selected at com2 and fasr speed selected but then i get this
Resetting Card ...
No ATR from card
any ideas what im doing wrong?
using a serial cable with a gender changer (used this may a time on various cable boxes)