bke 2.2

[noodles0800]

got hold of a samsung box 2100c
put the jtag on it on the points
• CONNECT JTAG AS PER CONFIG BELOW
• PIN 2 – 3.3v
• PIN 5 – TDI
• PIN 7 – TMS
• PIN 9 – TCK
• PIN 13 – TDO
• PIN 4 – 20 (EVEN) – GND
when i connect to the box it gives me the ird but the box key comes up with nothing but 00 all the way along.
ive tried updating the box but still the same
anyone got any help for me
:Fish: :Fish: :Fish:

 

[dave_c]

could need the latest bytes depending on the software version on ur sammy and area u r in

 

[noodles0800]

im in stoke-on-trent
how do i check what software version im on

 

[dave_c]

on the remote , press settings , then technical stuff , then press red button to go through pages

 

[Mark_The_Yid]

This might help

https://www.digitalworldz.co.uk/index.php?threads/200298/

 

[noodles0800]

will try this but what should i use to edit the config files
or could someone send me the config file with the update on

 

[noodles0800]

sorry to be a pain
got what i think is the bk from bke2.2
will be testing tomorrow and letting you know
thanks for all the help

 

[vodka25]

what area are u i have the latest configs if u need them

 

[abs001]

Can I have a copy of the files for C&W area please.

 

[vodka25]

remember to start MAC_MOT driver
below is a list of other byte address's

excw 3_2B

0x00942d24 8

excw 3_3B
0x00974c70 8
or
0x009b5290 8
or
0x00f6a930 8

excw 3_5B
0x0086b9a0 8
or
0x008abfc0 8
or
0x00f69f60 8
or
0x00f69af8
Excw 3.6
0x008D6284 (has not changed from what im told with 3.7 update not tested yetbbut will this aft)

pure 3_2L & 3_3L
0x00f6a8a8 8

pure 3_5L
0x0086b6b0 8
or
0x008adcd0 8
or
0x00f69af8 8

Pure 3.6
0x00895934


IRD for all

0x20020004 4

 

[abs001]

remember to start MAC_MOT driver
below is a list of other byte address's

excw 3_2B

0x00942d24 8

excw 3_3B
0x00974c70 8
or
0x009b5290 8
or
0x00f6a930 8

excw 3_5B
0x0086b9a0 8
or
0x008abfc0 8
or
0x00f69f60 8
or
0x00f69af8
Excw 3.6
0x008D6284 (has not changed from what im told with 3.7 update not tested yetbbut will this aft)

pure 3_2L & 3_3L
0x00f6a8a8 8

pure 3_5L
0x0086b6b0 8
or
0x008adcd0 8
or
0x00f69af8 8

Pure 3.6
0x00895934


IRD for all

0x20020004 4

Thanks Vodka

 

[vodka25]

no problem if u need hand editing the config let me know also best to put it in debug mode for jtaging but not always needed

 

[abs001]

no problem if u need hand editing the config let me know also best to put it in debug mode for jtaging but not always needed

I'm ok at editing the files but really not getting anywhere with retriving the BK off 2100.

I'm off shopping in a few mins wiv Mrs but will be back on here later on and after some advice if I dont get the BK, Thx

 

[vodka25]

not a prob ill keep checking back m8 and ill jtag this 2100 now to check the bytes havent changed with 3.7 update

 

[noodles0800]

managed to change the byte.....
it sorted it ..
it has been updated so this is the latest flash from c&w
checked it today with a fun card and everyting is working great
thanks to everyone for the help
:Clap: :banana:
:Clap: :banana:

 

[abs001]

not a prob ill keep checking back m8 and ill jtag this 2100 now to check the bytes havent changed with 3.7 update

Vodka25: I keep getting all Zero's when using BKE, OCD or SDT, I have reset the box then set the NetID forced an update but still no joy, It's on ver 3.6 and I have used the Bytes accordingly any further advice appreciated, the 1 thing i haven't tried (not sure if it'll make any difference) is put the box on stream and then tried retriving the BK.

 

[vodka25]

have u tried putting the box in debug mode?

how did u set the net id? as far as i am aware u can only set the net id with a fun card with correct ird n bk? unless u mean u reset the box to 099999

anyway try putting box in debug mode i had one box that would not jtag what so ever once in debug mode got it first time what area r u in ?

 

[vodka25]

i will try myself with my box to see if the 3.7 cw bytes are same as 3.6 give me 10 mins

 

[vodka25]

Vodka25: I keep getting all Zero's when using BKE, OCD or SDT, I have reset the box then set the NetID forced an update but still no joy, It's on ver 3.6 and I have used the Bytes accordingly any further advice appreciated, the 1 thing i haven't tried (not sure if it'll make any difference) is put the box on stream and then tried retriving the BK.

My apologies the bytes must have changed i also get 000000000000 for my
box key i shall try get the latest bytes (not sure how like lol)

 

[dave_c]

not sure but i think the bytes for c/w 3.7 are 0x008ffe38 , cant test as im not in the right area