AU fun fix march 2006

[mx'er]

heres the original readme, hope it helps

1. OPEN THE APPROPRIATE NAGRAEDIT .BN11 ROM11 IMAGE FILE

2. EDIT THE IRD WITH YOUR IRD

3. EDIT THE BOXKEY WITH YOUR BOXKEY

4. SAVE THE IMAGE

PROGRAM THE FLASH WITH ONE OF THE THREE VERSIONS OF THE FLASH INCLUDED
- C&W
- NTL
- TW

ONLY USE THE APPROPRIATE FLASH FOR YOUR AREA!

PROGRAM THE INTERNAL EEPROM WITH CryptHexEEP.hex

PROGRAM THE EXTERNAL EEPROM WITH YOUR EDITED NAGRAEDIT IMAGE.
SOME PROGRAMMERS MAY REQUIRE YOU TO RENAME THE EXTENSION TO .BIN

 

[adflondon]

heres the original readme, hope it helps

1. OPEN THE APPROPRIATE NAGRAEDIT .BN11 ROM11 IMAGE FILE

2. EDIT THE IRD WITH YOUR IRD

3. EDIT THE BOXKEY WITH YOUR BOXKEY

4. SAVE THE IMAGE

PROGRAM THE FLASH WITH ONE OF THE THREE VERSIONS OF THE FLASH INCLUDED
- C&W
- NTL
- TW

ONLY USE THE APPROPRIATE FLASH FOR YOUR AREA!

PROGRAM THE INTERNAL EEPROM WITH CryptHexEEP.hex

PROGRAM THE EXTERNAL EEPROM WITH YOUR EDITED NAGRAEDIT IMAGE.
SOME PROGRAMMERS MAY REQUIRE YOU TO RENAME THE EXTENSION TO .BIN

Thanks for your help mate but it doesnt seem to work

not sure if im using the right int & ext eeprom

 

[Hitman]

Thanks jinxt

Works great in c&w Essex

Nice 1

 

[bambam]

Help for ppl

For ppl who don't know how to do this just download & use the files for the fix below with intructions included.

 

[adflondon]

For ppl who don't know how to do this just download & use the files for the fix below with intructions included.

This still doesnt work for me, im not sure what im doing wrong.

do you need to add your ird back to front?

 

[bambam]

best thing to do mate is to programme the funcard. turn ur digi box off from the mains put in the card. turn box back on. go to channel 7 and wait 10-15 minutes, it should work .

 

[rp3X]

Thx for the fix and thx to bambam for the super dummy pack.

I need it lol

Once I used that RHv1_EEgen program and saved my details to a bin file, and flashed it it worked fine but oddly wasnt working if I flashed it with an older created hex files... so that program gets a relibility factor 10 !

Also noticed it went to channel 7 and few secs later changed and ITV 3 and + was all blank but then went back to footy on BBC1 waitied a minute and then changed to other channels and fine.....

Takes a bit of time for it to kick in but all good

 

[Jade]

Atmeg

Thanks For That M8 Have You The Atmeg Yet

 

[TheDogsNutts]

Thanks For That M8 Have You The Atmeg Yet

there is no fix for the atmega yet............

 

[jal]

thanks the file works fine in n*l.:banana:

 

[vic1234]

works a treat thanx thanx thanx mate...

 

[vic1234]

tw area ta much ..works a treat..

 

[hamster]

thanks to all for this fix fun au.work great in x cw :Clap:

 

[k11nfr]

good work
working sound as a quid in notts ntl
THANKS

 

[paddington]

good work
working sound as a quid in notts ntl
THANKS

Hey guy's make the most of it come next key change they will go off, and that will be tomorrow, someone done the fix earlier and it lasted about 30 mintues and it went off.

The new key roll method fools the fun and atmega cards, the cards are updating but with false key's FF FF FF FF, something to do with maps call! the cards do not respond with the correct massage, hence FF FF FF FF in the firat 8 digits or last 8 digits.

The fun and Atmega cards are nearing the end and are heading for the ice scrapers yard :FRIGHT:, I do hope I am wrong though......

 

[rob 568]

hey jinxt
First of thanks for the post, you have helped loads of us out.
Can you give a big thanks for the master behing the file
thanks Rob

:Clap: :Clap: :Clap:

 

[v.i.p]

This still doesnt work for me, im not sure what im doing wrong.

do you need to add your ird back to front?

Hiya mate,

I put my IRD in backwards. Are you C*W, if so all you need is the following...it even includes instructions!

Simply use Nagra 4.1 to open the C*W.bn11 file, add your IRD (backwards and BK). Resave the file, call it 'mine.bin'. Make sure it doesn't say 'mine.bin.bn11 otherwise your programmer may not like it.

Finally put 'AUFUN_CW.HEX into flash, c&wInternalEEP.hex into Internal and mine.bin into the External EEProm.

Program card and away you go.

I take no credit for the instructions or files....a special thanks to Clive 58 and others.

PS: These are instructions if you are starting from scratch.

:Cheers:
V.I.P

 

[dave_c]

thx for that working finre in northants n*l

we will se what happens at next keyroll

fingers crossed all will be well

 

[icek]

Worked first time, thanks to all involved.... keep up the good work !!!:Clap:

 

[pil196]

hold your horses folks i came across this earlyer today as every one was looking for a fix not in fix as in drug fix lol
i tryed wrighting this but i have to admit ther are a few differences
so who knows
my logger has just gone 10 1 so on the next key roll if this au fails
could some one please pm me the emms data
fingers crossed


:Cheers: