derek12345
Inactive User
- Joined
- Aug 20, 2005
- Messages
- 570
- Reaction score
- 10
how do i get the service files so i can upload then onto thread tried the tuts but they only for setting up box
arnet service files
- Thread starter derek12345
- Start date
T
tmc
Guest
1.Turn on STB
2.Press menu
3.Press OK (Installation on TV)
4.Press four 0 (If you have change this but in your code. If you have turn it off just goto step 5)
5.Press DATA DOWNLOAD
6.Press OK
8.Select data download or channel data
9.On your computer start up STB editor
10.Click on download
11.A box will come on
12.Press SI/CODE ( si receive = channel data / code receive = image )
13.Click on Receive
14.Click on open and but a name for the factory date file
15.Change to right com port & FTA MODEL
16. Know press OK from step 8 and wait for CH in the window of STB
17.Press start on STB editor and it will start sending the data to your computer
And that it.
tmc
2.Press menu
3.Press OK (Installation on TV)
4.Press four 0 (If you have change this but in your code. If you have turn it off just goto step 5)
5.Press DATA DOWNLOAD
6.Press OK
8.Select data download or channel data
9.On your computer start up STB editor
10.Click on download
11.A box will come on
12.Press SI/CODE ( si receive = channel data / code receive = image )
13.Click on Receive
14.Click on open and but a name for the factory date file
15.Change to right com port & FTA MODEL
16. Know press OK from step 8 and wait for CH in the window of STB
17.Press start on STB editor and it will start sending the data to your computer
And that it.
tmc
Its a good idea but I don't think its necessary to do it anymore as the new firmware has channel mapping.
Similar threads
