Anybody know how to flash a SAGEM with FlashFXP

[tony_simo]

Does anyone know how to flash a SAGEM box with using FlashFXP.... I have flashed a few of these things but at the moment I am trying to use IFA but with no success I am unable to connect to the box although I have the correct settings...

The only way I am able to connect to the box is through FlashFXP.....

Anyone....!!!

 

[Fergalsworld]

Look here
http://www.digitalworldz.co.uk/forums/index.php?resources/213/

 

[tony_simo]

Have tried to download this and it seems to fail.... it must be corrupted or something....

 

[Ramtec]

ifa should connect automatically make sure the box is off until you're told to plug it in

 

[Fergalsworld]

D/loads ok for me
transfer the image to the /tmp folder then
dbox,service,image upgrade/backup (blue)
expert functions
flash/write one partition
flash without bootloader

 

[freestyle]

Are you connecting dbox to pc or through a router . If you have a straight through connection pc to dbox should be very straight forward. If all anti virus and firewall is switched off.

 

[tony_simo]

ifa should connect automatically make sure the box is off until you're told to plug it in

I Tried this many times and it fails drasticaly.... I have included a screenshot of the IFA Failure Screen...

 

[tony_simo]

D/loads ok for me
transfer the image to the /tmp folder then
dbox,service,image upgrade/backup (blue)
expert functions
flash/write one partition
flash without bootloader

If i remember right do I not have to rename the file to cramfs or something....[/I]

 

[Fergalsworld]

No just pop it into the /tmp folder

 

[waka]

You've probably already done this but...you have extracted the image file from the rar file so you are let with an .img file?

W.