screenshot for Nobs ! Please see in the attached screenshot the options and also the possibility to chmod the file. It's called rights and you access it by pressing 1. In the Screenshot no KeyFile is shown !!
IN ABOVE SCREENSHOT THE FILE THAT YOU NEED TO MODIFY IS NOT THE ONE THAT IS SELECTED !!!
I HAVE NOT GOT CABLE NOR DO I RUN A ILLEGAL IMAGE !!! ILLUSTRATION PURPOSE ONLY !!!
I think its much much easier to just edit manually on dbox rather than setup dbox and ftp.
This was found on another site, hope it helps:-
Guide to changing the Key codes on Nokia D box via remote control
NOTE: When I refer to scroll in text below, I mean using the Toggle buttons that are around the OK button on the remote control, the button below the OK you use to scroll down, the one above use to scroll up and down, the buttons to the left & right you use to move left & right. If you make a mistake and you want to go back to the start, press the home button and don’t save changes. To get started follow instructions below:
1. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK. You should now be looking at the files on the D Box.
2. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen!
3. When you find the VAR file and you press OK, scroll to Keys & press OK
4. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.
5.After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.
6.Now you need to scroll to the code that you are going to change (you need that special file with the numbers!!). We are only changing one digit this time, in future you may have to change more digits.
7. When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor!
8. Scroll to the digit you want to change, and then use the numbers on your remote to change that digit to whatever character you want, e.g. if you want to change the digit to 3 , you press the number 3 button four times until 3 appears, the press ok. The same would apply if you want to change it to 4, you press the number 4 button on your remote four times and press OK.
9. When you have changed the digit to the new one, press the Home button, it will ask you do you want to save changes, if you are happy with the new change, scroll to yes and press OK.
10. You should now have changed the code, to get back to the TV screen, press home.
11. In order for the changes to work you need to reboot, press the D box button and scroll to reboot and press OK. When it reboots you channels should be back!
