amiko 8900

[ang0ne]

please help I am new to this forum I flashed receiver with latest software and now I get 0000 on display with no function what do I do thanks

 

[theblueirish]

What have you flashed and how did you flash it?

 

[ang0ne]

hi thanks for reply I flashed with latest software update from spark 1.2.68 after a couple of days it wont boot

 

[theblueirish]

did you upgrade spark or flash enigma?

 

[ang0ne]

it was with spark online through receiver thanks

 

[theblueirish]

try this and let me know what happens:
1. Turn off receiver
2. On Frontpanelu hold [OK] and then turn the power switch
3. After about 5 seconds, the display should appear in the display [FORCE] then you should release the [OK] and press [P -]
4. Once you see [EN16] press [OK] and allow to boot

 

[ang0ne]

hi have followed your steps but no change after 1 minute display changes to 0001 and then 0002 thanks

 

[theblueirish]

ok repeat but press p+ instead of p-

 

[ang0ne]

its the same as before by holding ok then powering on the receiver you do not get force just 0000 thanks

 

[theblueirish]

I have uploaded the 8900 rescue image here Amiko Alien 8900 spark rescue imagw - Downloads - DigitalWorldz Technology Forum - Satellite, television, consoles, community
You may need to have your posts approved before you can download.

Download the rescue image, extract and put the 2 update files on a formatted fat 32 usb stick.

Place in the back of the receiver, turn on while pressing ok till you see "forc"

Press up till you see "spar"

Press right till you see "fact"

Press ok.

 

[rkabishi]

looking forward getting this receiver

 

[rkabishi]

can anyone out there has a how to for the amiko hd8900?