Getting this when trying to flash the modem, had a look at google 1st obviously and the guy says he got round it by typing in the commands instead of pasting.
Tried that though and still no luck, when i power up the modem with just an ethernet cable attatched i doesn't let me log into the modem.
I thought at 1st it was bricked but can still get the option p ect just can't get it to communicate with the TFTP
I've done everything like firewalls off and anti virus off and even flashed a spare modem i had and it worked perfectly so its defo something to do with this modem.
In the other modem i flashed the only thing different was the part highlighted in bold
Anyone any ideas?
Tried that though and still no luck, when i power up the modem with just an ethernet cable attatched i doesn't let me log into the modem.
I thought at 1st it was bricked but can still get the option p ect just can't get it to communicate with the TFTP
I've done everything like firewalls off and anti virus off and even flashed a spare modem i had and it worked perfectly so its defo something to do with this modem.
In the other modem i flashed the only thing different was the part highlighted in bold
BCM3349A0.........
100000010346890...............
MemSize: ......................... 8M
Flash detected @0xbe000000
Signature: a603p complete
Broadcom BootLoader Version: 2.1.6d release Gnu
Received 2097152 bytes
Build Date: May 10 2004
Build Time: 19:06:46
Image 1 Program Header:
Signature: a603
Control: 0005
Major Rev: 0000
Minor Rev: 0000
Build Time: 2004/8/3 03:22:27 Z
File Length: 787963 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: b24a
CRC: 96fae6c5
Image 2 Program Header:
Signature: a603
Control: 0005
Minor Rev: 0000
Build Time: 2004/8/3 03:22:27 Z
File Length: 787963 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: b24a
CRC: 96fae6c5
Enter '1', '2', or 'p' within 2 seconds or take default...
.
Board IP Address [0.0.0.0]: 192.168.100.1
Board IP Mask [255.255.255.0]:
Board IP Gateway [0.0.0.0]:
Board MAC Address [00:10:18:ff:ff:ff]:
Internal/External phy? (i/e)
Init EMAC, DMA, and MII PHY...
Autonegotiation started, waiting for completion...ERROR: Au
...
MAC setup for HalfDuplex
Main Menu:
==========
d) Download and save to flash
g) Download and run from RAM
c) Store icePROM bootloader to flash
b) Boot from flash
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory
TFTP Get Selected
Board TFTP Server IP Address [0.0.0.0]: 192.168.100.10
Enter TFTP filename []: 250hack_dump_telnet.bin
Free store: a0500000
Starting TFTP of 250hack_dump_telnet.bin from 192.168.100.10
Getting 250hack_dump_telnet.bin using octet mode
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Retry limit exceeded on block 1....Aborting session
Store parameters to flash ? [n]
Anyone any ideas?