250 modem command help

[jhon101]

can anyone let me know the command to reflash a modem which has already been flashed

thanks

 

[Mujja]

Just done my 1st 250 an hour ago so might not be the answer you're looking for. If you want to clear all settings the before an update "Ambit config tool 096" will wipe all settings.

 

[gentlex]

can anyone let me know the command to reflash a modem which has already been flashed

thanks

ther is no reflash command just flash the modem same way u did before

 

[jhon101]

my modem which is flashed how do i flash it again

 

[jumpinjo]

can anyone let me know the command to reflash a modem which has already been flashed thanks

ther is no reflash command just flash the modem same way u did before

my modem which is flashed how do i flash it again

didn't you take in gentlex's reply

 

[jhon101]

the first time i flashed the modem i pressed p to get to the mainmenu..
know i am trying to flash infinite upgrade bin but when i press p it doesnt stop

this is what it does>

hal_diag_init
Init device '/dev/BrcmTelnetIoDriver'
Init device '/dev/ttydiag'
Init tty channel: 8033c1a8
Init device '/dev/tty0'
Init tty channel: 8033c1c8
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: fffe0300.2
Set output buffer - buf: 8036e7e8 len: 2048
Set input buffer - buf: 8036efe8 len: 2048
BCM 33XX SERIAL config

Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x132afbd9
Settings were read and verified.


Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0xee3c4513
Settings were read and verified.

Creating SNMP agent cablemodem agent

If you pressed the 's' key before this point, we will skip driver initialization
...

vvv Interface creation and driver startup beginning vvv

-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
Registering DOCSIS CableModem driver
-> End DOCSIS CM WAN interface

-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces

-> Begin USB LAN interface
Creating HAL object for the USB interface
Registerin-> End USB LAN interface

-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=00:d0:59:f3:87:12)
Registering IP Stack1 driver

Creating HAL object for IP Stack2 (MAC Addr=00:10:18:de:ad:02)
Registering IP Sta

IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interfaces

^^^ Interface creation and driver startup complete ^^^

Propane version: 2.0.1 (28 Oct 2002)
T-LinuxAgent:AgentInitSnmp
LX- Now in AgentStartSnmp()
LX-AgentStartSnmp:
DON'T think we need to go here - so don't:::: init_mib !!!!
WARNING: netsnmp_brcm_create_tstring called with no address!


NOT Calling VacmTest for debug users
NOT STARTING THE LOCAL snmp thread!! - must be using the v2
LX- Now in AgentStartSnmp() - finished
Creating SNMP agent CPE diag agent
LX- Now in AgentStartSnmp()
LX- Now in AgentStartSnmp() - finished
* *
* *
* *
* * *
* *
* *
* *
* *
* *
* *
* *
*
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------+
| _/_/ _/_/_/_/ _/_/ |
| _/ _/ _/ _/ _/ Broadband |
| _/ _/ _/ _/ |
| _/_/ _/_/_/ _/ Foundation |
| _/ _/ _/ _/ |
| _/ _/ _/ _/ _/ Classes |
| _/_/_/ _/ _/_/ |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 5.01.01.003_001(III) RELEASE |
| |
| Features: Console TelnetConsole Nonvol Slim HeapManager SNMP Networking |
+----------------------------------------------------------------------------+
| Standard Embedded Target Support for BFC |
| |
| Copyright (c) 2003-2004 Broadcom Corporation |
| |
| Revision: 3.0.1 RELEASE |
|
| Features: PID=0xc012 Bootloader-Rev=2.1.6d |
| Features: Bootloader-Compression-Support=0x19 |
+----------------------------------------------------------------------------+
| eCos BFC App | |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.0.2 RELEASE
| |
| Features: eCos Console Cmds, (no Idle Loop Profiler) |
+----------------------------------------------------------------------------+
| _/_/ _/ _/ |
| _/ _/ _/_/ _/_/ DOCSIS Cable Modem |
| _/ _/ _/ _/ |
| _/ _/ _/ |
| _/ _/ _/ CableLabs Certified |
| _/ _/ _/ _/ tComLabs Certified |
| _/_/ _/ _/ |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
|
| Revision: 5.01.01.003_001(III) RELEASE |
| |
| Features: AckCel(tm) DOCSIS 1.0/1.1/2.0 Propane(tm) CM SNMP w/Factory MIB |
| Features: Support CM Vendor Extension |
+----------------------------------------------------------------------------+
| Broadcom Data-Only CM Vendor Extension |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.0.2 RELEASE |

| Features: DHCP Server HTTP Server OSS2-N-03025 Visualization LED
| Features: Controller Reset/Standby Switch Support |
+------------------------------------------
| Build Date: Dec 22 2005
| Build Time: 15:07:23 |

+----------------------------------------------------------------------------+


Running the system...

VScanning DS Channel at 586750000 Hz...
Event Log initializing with stored events.
Scanning DS Channel at 858250000 Hz...
list of commands...

CM> ppppppppppppppScanning DS Channel at 858000000 Hz...
pScanning DS Channel at 857750000 Hz...
pScanning DS Channel at 857250000 H
DS Channel at 857000000 Hz...
p DS Channel at 856750000 Hz...
Scanning DS Channel at 856500000 Hz...
DS Channel at 856250000 Hz...
pScanning DS Channel at 856000000 Hz...
Scanning DS Channel at 586750000 Hz...
55750000 Hz...
DS Channel at 855500000 Hz...
pScanning DS Channel at 855250000 Hz...
Scanning DS Channel at 855000000 Hz...
pScanning DS Channel at 854750000 Hz...
Scanning DS Channel at 854500000 Hz...
54250000 Hz...
Scanning DS Channel at 854000000 Hz...
pScanning DS Channel at 853750000 Hz...
pppScanning DS Channel at 853500000 Hz...
p86750000 Hz...
Scanning DS Channel at 853250000 Hz...
pScanning DS Channel at 853000000 Hz...
Scanning DS Channel at 852750000 Hz...
pScanning DS Channel at 852500000 Hz...
Scanning DS Channel at 852250000 Hz...
Scanning DS Channel at 852000000 Hz...
pScanning DS Channel at 851750000 Hz...
Scanning DS Channel at 851500000 Hz...
Unknown command: 'ppppppppppppppppppppppppppppp'

CM> Scanning DS Channel at 851250000 Hz...
Scanning DS Channel at 851000000 Hz...
DS Channel at 586750000 Hz...
Scanning DS Channel at 850750000 Hz...
Scanning DS Channel at 850500000 Hz...
Scanning DS Channel at 850250000 Hz...
CM>
CM> DS Channel at 850000000 Hz...
p DS Channel at 849750000 Hz...
onsole Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 849500000 Hz...
Scanning DS Channel at 849250000 Hz...
Scanning DS Channel at 849000000 Hz...
CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> M> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 848750000 Hz...
Scanning DS Channel at 848500000 Hz...
CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 586750000 H
CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 848250000 Hz...
Scanning DS Channel at 848000000 Hz...
nel at 847750000 Hz...
CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 847500000 Hz...
CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 847250000 Hz...
Scanning DS Channel at 84700000
Scanning DS Channel at 846750000 Hz...
CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 846500000 Hz...
Scanning DS Channel at 846250000 Hz...
Scanning DS Channel at 846000000 Hz...
Scanning DS Channel at 586750000 Hz...
Scanning DS Channel at 845750000 Hz...
S DS Channel at 845500000 Hz...
CM>
CM>
CM>
CM> Scanning DS Channel at 845250000 Hz...
pScanning DS Channel at 844750000 Hz...
Scanning DS Channel at 844500000 Hz...
Scanning DS Channel at 844250000 Hz...
M> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> p[pScanning DS Channel at 844000000 Hz...
Scanning DS Channel at 843750000 Hz...
Scanning DS Channel at 843500000 Hz...
pScanning DS Channel at 586750000 Hz...
Scanning DS Channel at 843250000 Hz...
Scanning DS Channel at 843000000 Hz...
CM> p[ppp

Error - Unknown command: 'p[ppp'

CM> Scanning DS Channel at 842750000 Hz...
nel at 842500000 Hz...
Scanning DS Channel at 842000
CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 841750000 Hz...
Scanning DS Channel at 841500000 Hz...
Scanning DS Channel at 841250000 Hz...
Scanning DS Channel at 841000000 Hz...
CM> pwd


Instance: Console Thread (0x807e1c6c)

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Scanning DS Channel at 586750000 Hz...
DS Channel at 840750000 Hz...
Scanning DS Channel at 840500000 Hz...
Scanning DS Channel at 840250000 Hz...
Scanning DS Channel at 840250000 Hz...
Scanning DS Channel at 839750000 Hz...
DS Channel at 839500000 Hz...
pp-Scanning DS Channel at 839250000 Hz...
Scanning DS Channel at 839000000 Hz...
Scanning DS Channel at 838750000 Hz...
Scanning DS Channel at 838500000 Hz...
Scanning DS Channel at 586750000 Hz...
pScanning DS Channel at 838250000 Hz...
DS Channel at 838000000 Hz...
Scanning DS Channel at 837750000 Hz...
nel at 837500000 Hz...
Scanning DS Channel at 837250000 Hz...
Scanning DS Channel at 837000000 Hz...
Scanning DS Channel at 836750000 Hz...
Scanning DS Channel at 836500000 Hz...
Scanning DS Channel at 836250000 Hz...
Scanning DS Channel at 836000000 Hz...
DS Channel at 586750000 Hz...
nel at 835750000 Hz...
DS Channel at 835500000 Hz...
Scanning DS Channel at 835250000 Hz...
Scanning DS Channel at 835000000 Hz...
DS Channel at 834750000 Hz...

 

[gentlex]

ther is no real difference in the upgrade and the original so its not really need but if u still want upgrade and ur having no luck pressing p u can try telnet courtesy of koeveot and mark370

Set NIC ip and gateway to 192.168.100.2 now disable & enable network adapter.

Connect modem power up with no feed

Start tftpd32 Server Interface should read 192.168.100.2

In the tftpd Settings browse to directory where infinit-dump-new.bin is located select and press OK

Run telnet 192.168.100.1

enter username (admin) default if you havent changed this already

enter password (infinite) default if you havent changed this already

To stop scanning enter

cd \cm_hal

scan_stop

cd \

enter cd docsis

CM/DocsisCtl> enter dload 192.168.100.2 infinit-dump-new.bin

File should start transferring in tftpd it will show a progress bar

Once flash complete reboot modem

Connect feed and change NIC card settings back to obtain ip address automically now disable & enable network adapter

Open internet and connect to 192.168.100.1

enter username "Infinite" Notice upper and lower case

enter password "SetValue"Notice upper and lower case

Select software and the software version should read 5.01.01.000_004(III)



thats it all done.