Re: TM-twin_DdV3.2-beta_W-bootloader_and_splashscreen.rar
Yes i did explained and still the guy said to me that its the right one installed and we dont have any problem using it so far, but this guy sounded very poof and sounded like he doesn't what he was talking.
Taken from a Tutorial i was writing a while ago for the Duo and the ViX image, although i never got around to completing it. It's the same procedure for your receiver.
Setting up a Softcam
In this part of the tutorial I am going to show you how to setup CCcam to work with a *** uk FTV or Free To View card. We will not however show you how to setup a softcam for any thing to do with Card Sharing, If this is what you are looking for Use
GOOGLE.
Before we go any further you will need a few things.
( you can place the card in the receiver now using any of the card reader slots but making sure the chip is face down )
1. The softcam you intend to use I am using CCcam for this tutorial.
2. A suitable FTP program, For the purpose of this tutorial I am using FileZilla as it is a free program.
3. A *** UK FTV card, a deactivated White *** card will work here.
4. A copy of Notepad++ ( you can use the built in windows notepad program but it gives mixed results )
5. Don't forget those clean underpants.
First you will need to download the Softcam a copy of which can be found here.
I my self am using enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk but any version will work.
You will also need to download Filezilla, a copy of which can be found on the forum or direct from the authors here.
You want the Client version and not the Server version.
And of course not forgetting Notepad++ which can be downloaded here.
making sure your receiver is fully connected to your network and you have a copy of the IP address for the receiver you can proceed to the next step.
Install Filezilla onto your PC / laptop allowing any access your firewall asks of you, then launch it once installed.
For this step i am going to use the Quick connect option but you can at a later date create a profile for your receiver so you can connect at the press of a button or two.
Along the top of the program you will see the following boxes.
Host: ( enter the IP address of your receiver here )
Username: This is set to ROOT by default so enter that.
Password: by default this if left blank or password, unless you have changes this. for now enter password.
Port: The default port is 21 so enter that then press the connect button.
If all goes successfully you should now be connected to your receiver. the boxes on the left of the program are your PC those on the right are the internal file structure of your Receiver. navigate to the TMP/ folder on your receiver and drag the softcam file ( must be in .ipk format ) to this location. once done you can exit from Filezilla. ( although you will need to use it once more before we are done ).
On your receiver navigate to the ipk installer. this can be found as so. Blue button> ViX> install local extension. If your file transfer via filezilla went correctly you will see the file listed here. Highlight this file and press the green button to install the file, you should see a conformation box just follow the directions selecting yet to reboot once complete.
While the receiver is rebooting install and launch notepad++
make a new file by clicking on File> New. you do not need to enter any thing into this file for use with a FTV card but the file is needed by the cam.
with this new file open again click on file but this time select the save as option and you will see another box popup.
In this new box select the location you wish to save this file to using the icons on the left hand side then under the File name heading enter the file name as
CCcam.cfg Making sure it is this exact spelling as it is case sensitive then under the heading Save as type select the following
All types (*.*) and press the save button. Once again open your FTP program and login as above but this time navigate to /ETC on the receiver and copy the file you just created there, exiting the program once done.
Now we can activate the Cam via the blue button. Blue button> softcam manager. press green to start the cam and blue to enable auto start.
Thats pretty much it. you should now be setup to use your *** uk FTV card Via CCcam.
So there you go, If you have made it through this tutorial and not needed to use those spare pair of underpants. Give your self a huge pat on the back and maybe go for a cuppa. you deserve it.