mark370
Inactive User
- Joined
- Sep 17, 2006
- Messages
- 311
- Reaction score
- 6
hi guys , ime after a little bit of help here with a Ambit120 , and before some one says dont bother there not worth it ,i no but its little project of mine ive been doing and ive got this far so i want to finish it off.
cut a long story short , the first time i tryed to get this modded , using blackat i flashed [iamhims] 2meg dump to the flash tab instead of sending it by tftp and of coarse this knacked things up , after that blackat would detect the bcm but would not detect the flash and i could'nt get no text at all in hyper/t so i put it in the cuboard out the way.
then the other day i thought i would try and get a bootloader on it , after reading the data sheet i found a way of reseting the flash chip and now it connects and detects the bcm & flash with blackat so i wrote bootloader on it fired up hyper/t and sent the 2meg dump with TFTP and all went ok , set my area settings and mac.
but the problem is now its in a reset loop the modem just keeps rebooting itself , classic symtems of same mac on UBR ,but i no its not because of mac because ive changed it with my own and it still does it.
after watching it reboot in hyper/t when i put settings in it saves them but soon as it reboots it looses the area settings , but strangley it keeps the downstreem freq.
the ip its giving me starts with 169.ect,ect
so if any one has any constructive thoughts on this that could help me out i would like to hear them.
many thanks
PS if any more info is needed please tell me ?
EDIT just thought ide add , i carnt access the 192.168.100.1 page even with a static ip.
cut a long story short , the first time i tryed to get this modded , using blackat i flashed [iamhims] 2meg dump to the flash tab instead of sending it by tftp and of coarse this knacked things up , after that blackat would detect the bcm but would not detect the flash and i could'nt get no text at all in hyper/t so i put it in the cuboard out the way.
then the other day i thought i would try and get a bootloader on it , after reading the data sheet i found a way of reseting the flash chip and now it connects and detects the bcm & flash with blackat so i wrote bootloader on it fired up hyper/t and sent the 2meg dump with TFTP and all went ok , set my area settings and mac.
but the problem is now its in a reset loop the modem just keeps rebooting itself , classic symtems of same mac on UBR ,but i no its not because of mac because ive changed it with my own and it still does it.
after watching it reboot in hyper/t when i put settings in it saves them but soon as it reboots it looses the area settings , but strangley it keeps the downstreem freq.
the ip its giving me starts with 169.ect,ect
so if any one has any constructive thoughts on this that could help me out i would like to hear them.
many thanks
PS if any more info is needed please tell me ?
EDIT just thought ide add , i carnt access the 192.168.100.1 page even with a static ip.
Last edited: