- Joined
- Aug 2, 2007
- Messages
- 5,413
- Reaction score
- 7,025
I'm looking at a PC for a relative and its dead. I checked the PSU with a meter using a jumper wire and it works fine bar, when I wiggle the main conntecotr to mobo while powered the fan goes on-off so I decided to change the PSU out a simple enough job. I picked a recon up for £15 and checked before installing the same way and all's well but after installing it's dead. I did take the front header jumpers out from the mobo as they were wrapped around a sata so I'm not 100% how they went back. I did take pictures before hand but a friggin cable got in the way so I cant tell how their meant to go back in.
Ive just been on the net and got the PDF for the mobo. Can someone take a look and tell me if I right or not. Some on the net sat white is not always the negative so I'm a bit confused. Someone might might spot a problem. also, the green white to is the power for the front.
Ive just been on the net and got the PDF for the mobo. Can someone take a look and tell me if I right or not. Some on the net sat white is not always the negative so I'm a bit confused. Someone might might spot a problem. also, the green white to is the power for the front.