Thank you for your reply Ferret and Popidol. i have just got the zGemma and i will take a look in to this but first im trying to figure out how i install openvix
Lifted this for another forum....its what I used follow this and you will be sorted
....the image used is the Openvix-Apollo 116
Guide How to set up an E2 combo box with vix image
This is a bit of a lengthy process
Power up the box, it will put you in the start up wizard.
Select HDMI, 1080p, and 50Hz (use the settings suited to your TV)
Select the language as English
Set the visibility to about 200, then use the options to size the menu to the TV screen
Set the menu inside the four corner markings.
Using the wizard check the internet connection, it should say it's working and display
your IP address (make a note of your IP you will need it later)
Now configure the tuners, Tuner A on this box is sat.
Set the satellite to Astra 28.2
Tuner B is cable
Type in your net id, put yes against all the QAM settings, Scan additional SR, at the bottom of the list type in your symbol rate
Choose to scan later
Keep clicking OK and let it set up your network interface.
You should insert a pen drive to store your EPG on, if the internal flash memory gets full
it can brick the box.
Menu - Setup - System - EPG - Settings
Change the EPG Location from internal flash to media/
hdd
(If it won't switch to media/hdd straight away, put the pen in and reboot the box, some are picked up others need the reboot to be seen )
Set Enable VM EPG to yes
In the EPG menu
Go into Multi EPG settings and press OK
Go into Cross EPG - Configure and change the scheduled download to once a day
Menu - Setup - Service Searching - Auto Bouquet Maker - Configure
Change Scheduled Scan to yes
In the Auto Bouquet Maker Menu pick Providers
Select Sky UK as yes then select your area, Select Virgin UK as yes and select your area (your net id's should match)
In the Auto Bouquet Maker Menu pick Providers Order
The one you set at the top will be the first set of groups when looking in FAVS, the second with be further down the list
Scan for channels
You should now have a nice neat channel list for cable and sat channels
Menu - Pugins - Download Pugins (green button) - Scroll down to softcams
Download C
Ccam and MG Cam.
Download the attached files at the bottom of this guide, unzip, double click on the newcamd.list file
Change the front of your N
Line or
lines so it reads CWS =
Paste your line over the example lines in the file so it looks similar. Save.
Open Filezilla Client
Across the top, in Host type in your IP address, in username type in root, leave password blank and in port type in 21
Then press quick connect.
The left hand boxes are your
computer, the right hand boxes are your box.
On the left browse to the files you have downloaded.
On your right browse to usr/keys
Click on one of the files on the left, right click your mouse and select upload.
Do the same with the other file, the two bottom windows should look the same.
Menu - Setup - Softcam / CI - Softcam Manager
Green Button - Start
Blue Button - Enable Start Up
Most cable
servers supply N lines so I haven't included using CCcam
...used this procedure for a Zegemma H1... :goodluck: let us know how you fair...
