Sn0wbreeze 2.4 is now available for Windows users to jailbreak iOS 4.3.1 running on iPhone 4, 3GS, iPad and iPod touch. Just like PwnageTool for Mac, Sn0wbreeze jailbreak is also tethered for all devices, which means you will have to boot into a jailbroken state every time you reboot your device.
Note:
Sn0wbreeze 2.4 supports Ultrasn0w unlock for basebands (01.59.00 / 04.26.08 / 05.11.07 / 05.12.01 / 05.13.04 / 06.15.00)
ultrasn0w is NOT compatible with the folllowing basebands (02.10.04 / 03.10.01 / 04.10.01 / 05.14.02 / 05.15.04)
iPhone 3GS users can upgrade to 06.15.00 baseband now under Unlocks section in Expert.
Upgrading your iPhone 3GS baseband to the 06.15.00 iPad baseband hack to unlock MAY cause you to lose your GPS!
There is NO unlock for the stock iOS 4.3.1 yet. If your iPhone relies on a unlock, DO NOT update to stock iOS 4.3.1 yet.
Sn0wbreeze is a tethered iOS 4.3.1 jailbreak for iPhone, iPad and iPod touch.
Creating Custom iOS 4.3.1 Firmware On Windows
Step 1: First up, download all the required tools and files to your Windows desktop:
Download and install iTunes 10.2.1 for Windows.
Download Sn0wbreeze 2.4 for Windows.
Download iOS 4.3.1 for iPhone, iPad or iPod touch.
Step 2: Start Sn0wbreeze, click the next “blue” colored arrow to proceed.
Step 3: Select the required firmware .ipsw file for your iOS device by clicking on the “Browse” button.
Step 4: Sn0wbreeze will now identify the selected IPSW file. Once done, click the next “blue” colored arrow to proceed.
Step 5: Now select the “Expert Mode”, followed by “Build IPSW” option to start creating your custom firmware.
Note: If your iPhone relies on a unlock, proceed only by selecting “Baseband Preservation Mode” option instead of “Expert Mode”.
Since building custom firmware may take some time, you can optionally play Pac-Man game to kill some time.
Step 6: Sn0wbreeze will greet you with the following “Done!” message when the custom firmware has been successfully created.
Step 7: Now follow the onscreen steps to enter DFU mode using Sn0wbreeze:
Hold Power and Home buttons for 10 seconds
Now release the Power button but continue holding the Home button for 10 more seconds
You device should now be in DFU mode
If you have followed the steps correctly, you will get the following message from Snw0breeze
Restore iOS 4.3.1 Custom Firmware Using iTunes
Step 8: Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold Left “Shift” button on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in iTunes and then release this button.
This will make iTunes prompt you to select the location for your custom firmware 4.3.1 file. Select the required custom .ipsw file that you created above, and click on “Open”.
Step 9: Now sit back and enjoy as iTunes does the rest for you. This will involve a series of automated steps. Be patient at this stage and don’t do anything silly. Just wait while iTunes installs the new firmware 4.3.1 on your iOS device. Your iOS device screen at this point will be showing a progress bar indicating installation progress. After the installation is done, your iOS device will be jailbroken on iOS 4.3.1.
Booting in Tethered Mode
Last but not the least, since there is no untethered jailbreak for iOS 4.3.1 yet, we will have to boot it into a tethered jailbroken state. To do this, we will make use of a utility on Windows named “iBooty” as shown in the steps below.
Step 10: Run iBooty for Windows and select your iOS device from the dropdown menu.
Note: iBooty is extracted to the desktop (iBooty-for-4.3.1) after running Sn0wbreeze 2.4 on Windows.
Step 11: Now hit the “Start” button and follow the instructions on screen to enter your device in DFU mode:
Hold Power and Home buttons for 10 seconds
Now release the Power button but continue holding the Home button for 10 more seconds
You device should now be in DFU mode
Step 12: Once you are into DFU mode, iBooty will do its thing and after a short while, your iPhone, iPad or iPod touch will be booted in a jailbroken tethered mode on the latest iOS 4.3.1
Tethered Jail Break , will update the thread once the unthered jB is available
Once jail broken
Unlock iOS 4.3.1 on iPhone 4, 3GS Using Ultrasn0w [How To Guide]
Once you are done with the jailbreak, you can now unlock your iPhone on the supported basebands using Ultrasn0w 1.2 from Cydia. To do this:
Start “Cydia” on your iPhone.
Touch on “Manage” tab on the bottom.
Now touch on “Sources” .
Touch on “Edit” and then on “Add”. You will be prompted to enter a url source as seen in the screenshot below. Type “http://repo666.ultrasn0w.com” and touch on“Add Source” to add this repo if you haven’t already.
Cydia will now automatically update your sources by following a series of automated steps.
After installation is completed. Search for “ultrasn0w 1.2” in Cydia and install this application. This app will automatically unlock your iPhone so that you can use it with any carrier.
Step 3: Now simply restart your iPhone and voila! you should now have a fully unlocked iPhone 4 or 3GS, running iOS 4.3.1 !
Note:
Sn0wbreeze 2.4 supports Ultrasn0w unlock for basebands (01.59.00 / 04.26.08 / 05.11.07 / 05.12.01 / 05.13.04 / 06.15.00)
ultrasn0w is NOT compatible with the folllowing basebands (02.10.04 / 03.10.01 / 04.10.01 / 05.14.02 / 05.15.04)
iPhone 3GS users can upgrade to 06.15.00 baseband now under Unlocks section in Expert.
Upgrading your iPhone 3GS baseband to the 06.15.00 iPad baseband hack to unlock MAY cause you to lose your GPS!
There is NO unlock for the stock iOS 4.3.1 yet. If your iPhone relies on a unlock, DO NOT update to stock iOS 4.3.1 yet.
Sn0wbreeze is a tethered iOS 4.3.1 jailbreak for iPhone, iPad and iPod touch.
Creating Custom iOS 4.3.1 Firmware On Windows
Step 1: First up, download all the required tools and files to your Windows desktop:
Download and install iTunes 10.2.1 for Windows.
Download Sn0wbreeze 2.4 for Windows.
Download iOS 4.3.1 for iPhone, iPad or iPod touch.
Step 2: Start Sn0wbreeze, click the next “blue” colored arrow to proceed.
Step 3: Select the required firmware .ipsw file for your iOS device by clicking on the “Browse” button.
Step 4: Sn0wbreeze will now identify the selected IPSW file. Once done, click the next “blue” colored arrow to proceed.
Step 5: Now select the “Expert Mode”, followed by “Build IPSW” option to start creating your custom firmware.
Note: If your iPhone relies on a unlock, proceed only by selecting “Baseband Preservation Mode” option instead of “Expert Mode”.
Since building custom firmware may take some time, you can optionally play Pac-Man game to kill some time.
Step 6: Sn0wbreeze will greet you with the following “Done!” message when the custom firmware has been successfully created.
Step 7: Now follow the onscreen steps to enter DFU mode using Sn0wbreeze:
Hold Power and Home buttons for 10 seconds
Now release the Power button but continue holding the Home button for 10 more seconds
You device should now be in DFU mode
If you have followed the steps correctly, you will get the following message from Snw0breeze
Restore iOS 4.3.1 Custom Firmware Using iTunes
Step 8: Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold Left “Shift” button on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in iTunes and then release this button.
This will make iTunes prompt you to select the location for your custom firmware 4.3.1 file. Select the required custom .ipsw file that you created above, and click on “Open”.
Step 9: Now sit back and enjoy as iTunes does the rest for you. This will involve a series of automated steps. Be patient at this stage and don’t do anything silly. Just wait while iTunes installs the new firmware 4.3.1 on your iOS device. Your iOS device screen at this point will be showing a progress bar indicating installation progress. After the installation is done, your iOS device will be jailbroken on iOS 4.3.1.
Booting in Tethered Mode
Last but not the least, since there is no untethered jailbreak for iOS 4.3.1 yet, we will have to boot it into a tethered jailbroken state. To do this, we will make use of a utility on Windows named “iBooty” as shown in the steps below.
Step 10: Run iBooty for Windows and select your iOS device from the dropdown menu.
Note: iBooty is extracted to the desktop (iBooty-for-4.3.1) after running Sn0wbreeze 2.4 on Windows.
Step 11: Now hit the “Start” button and follow the instructions on screen to enter your device in DFU mode:
Hold Power and Home buttons for 10 seconds
Now release the Power button but continue holding the Home button for 10 more seconds
You device should now be in DFU mode
Step 12: Once you are into DFU mode, iBooty will do its thing and after a short while, your iPhone, iPad or iPod touch will be booted in a jailbroken tethered mode on the latest iOS 4.3.1
Tethered Jail Break , will update the thread once the unthered jB is available
Once jail broken
Unlock iOS 4.3.1 on iPhone 4, 3GS Using Ultrasn0w [How To Guide]
Once you are done with the jailbreak, you can now unlock your iPhone on the supported basebands using Ultrasn0w 1.2 from Cydia. To do this:
Start “Cydia” on your iPhone.
Touch on “Manage” tab on the bottom.
Now touch on “Sources” .
Touch on “Edit” and then on “Add”. You will be prompted to enter a url source as seen in the screenshot below. Type “http://repo666.ultrasn0w.com” and touch on“Add Source” to add this repo if you haven’t already.
Cydia will now automatically update your sources by following a series of automated steps.
After installation is completed. Search for “ultrasn0w 1.2” in Cydia and install this application. This app will automatically unlock your iPhone so that you can use it with any carrier.
Step 3: Now simply restart your iPhone and voila! you should now have a fully unlocked iPhone 4 or 3GS, running iOS 4.3.1 !