just added this to the stickies, but it's here too in case you miss the stickies.
A new Toshiba-samsung firmware for the xbox360 has been released!
(v5.1) Open Tray errors fixed (PFI and SS read routines updated)
(v5.1) 5.1c (Dual speed, default fast) and 5.1d (Dual speed default quietslow) read speed (Originals unaffected). Both toggle with original Xbox1/360 disc
(V5.1) Xbox1 DDE errors caused by firmware, patched
(V5.1) Possible Xbox1/360 DDE errors caused by firmware, patched
(V5.1) Single Layer DVD disc support(+/-RW) for both Xbox1 and 360
(v5.1) New easier batch file "Make Xtreme firmware.cmd" to make all firmwares.
*Open tray errors now fixed for good, but "Open Tray" is still a valid status for disc insertions when the drive cannot recognize the disc.
*Dual speed firmwares C (default fast) and D (default quite/slow) return. Both toggle with original Xbox1/360 disc. Originals unaffected.
*Added patch to routines that specifically targeted Xbox 1 discs with read errors
*Added patch to a routine that may have caused read errors on Xbox1/360 discs.
*Added support for -/+RW discs for both Xbox1 and 360 discs.
*Added easier batch file to create firmwares "Make Xtreme firmware.cmd".
Single layer disks are supported for both Xbox1 and 360 (360 Single layer is supported, but not yet able to be reproduced correctly). For Xbox 1 the disks can be in either the same normal raw dump method or in XBOX file ISO format. This fully works with Xbox 1 using the new(not released yet) Qwix(info) or gdfimage created ISO. The default.xbe must be unmodified and still be signed (If in doubt , copy from original). Use xbefix to check if your xbe has been modified and needs to be unpatched.
360 file ISO is still in development. The exact structure for the 360 disc is being developed and a new Qwix will support the creation of these disks.
A new Toshiba-samsung firmware for the xbox360 has been released!
(v5.1) Open Tray errors fixed (PFI and SS read routines updated)
(v5.1) 5.1c (Dual speed, default fast) and 5.1d (Dual speed default quietslow) read speed (Originals unaffected). Both toggle with original Xbox1/360 disc
(V5.1) Xbox1 DDE errors caused by firmware, patched
(V5.1) Possible Xbox1/360 DDE errors caused by firmware, patched
(V5.1) Single Layer DVD disc support(+/-RW) for both Xbox1 and 360
(v5.1) New easier batch file "Make Xtreme firmware.cmd" to make all firmwares.
*Open tray errors now fixed for good, but "Open Tray" is still a valid status for disc insertions when the drive cannot recognize the disc.
*Dual speed firmwares C (default fast) and D (default quite/slow) return. Both toggle with original Xbox1/360 disc. Originals unaffected.
*Added patch to routines that specifically targeted Xbox 1 discs with read errors
*Added patch to a routine that may have caused read errors on Xbox1/360 discs.
*Added support for -/+RW discs for both Xbox1 and 360 discs.
*Added easier batch file to create firmwares "Make Xtreme firmware.cmd".
Single layer disks are supported for both Xbox1 and 360 (360 Single layer is supported, but not yet able to be reproduced correctly). For Xbox 1 the disks can be in either the same normal raw dump method or in XBOX file ISO format. This fully works with Xbox 1 using the new(not released yet) Qwix(info) or gdfimage created ISO. The default.xbe must be unmodified and still be signed (If in doubt , copy from original). Use xbefix to check if your xbe has been modified and needs to be unpatched.
360 file ISO is still in development. The exact structure for the 360 disc is being developed and a new Qwix will support the creation of these disks.
Last edited: