what is the box type for mgcamd
- Thread starter edogg
- Start date
Aliraza63
Inactive User
- Joined
- Feb 28, 2013
- Messages
- 341
- Reaction score
- 105
It is B 06 mate
B 00 is auto detect and is unreliable.
B 00 is auto detect and is unreliable.
edogg
Inactive User
- Joined
- Feb 24, 2006
- Messages
- 4,055
- Reaction score
- 723
so everything is the same as a duo because it was working fine but now only the cccam server is connecting I have oscam running and it was fine but now I might as well just run cccam because in oscam it is always the cccam in mgcamd nothing for the newcamd
Are you using the same version of mgcamd on the solo2 as with the Duo ?
I'm using the same cfg file that I used on my Duo with no issues, am at work at the mo so can't check but will update later tonight when I get home and have had a look.
Do you have the following line
CWS_KEEPALIVE = 300
Post your cfg lets have a look
CWS_KEEPALIVE = 300
Post your cfg lets have a look
edogg
Inactive User
- Joined
- Feb 24, 2006
- Messages
- 4,055
- Reaction score
- 723
here is my cfg and I have cws_ keepalive = 300
# EMM messages
# 00 dont show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 dont show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 }
# network ecm timeout in seconds
K: { 07 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 }
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 11 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 }
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 04 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }
# Mapping 18xx
# 00 disable mapping
# 01 map 18xx to 1801
# EMM messages
# 00 dont show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 dont show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 }
# network ecm timeout in seconds
K: { 07 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 }
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 11 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 }
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 04 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }
# Mapping 18xx
# 00 disable mapping
# 01 map 18xx to 1801
Nothing stands out as wrong ill take a look at mine when i get in from work.
edogg
Inactive User
- Joined
- Feb 24, 2006
- Messages
- 4,055
- Reaction score
- 723
@davvo I just edited my cfg file as yours this is the error I get from the oscam web page 2014/03/05 12:34:30 77200830 p login failed for user 'user'
2014/03/05 12:34:30 77200830 p NewcamdRemote1 [newcamd] disconnected: reason login error1
2014/03/05 12:34:30 7720D7B0 c anonymous (0963&000000/FFFF/0EDA/84:38029638F47F8E9184F96539D75A03CD): found (180 ms) by cccam.dyndns.org (P/2/2/2)
2014/03/05 12:34:38 77200830 p NewcamdRemote1 [newcamd] connecting to newcamd.tv:8990
2014/03/05 12:34:38 77200830 p login failed for user 'user'
2014/03/05 12:34:38 77200830 p NewcamdRemote1 [newcamd] disconnected: reason login error1
2014/03/05 12:34:38 7720D7B0 c anonymous (0963&000000/FFFF/0EDA/84:236522C5B17DE96F0214A445FD9E83E5): found (180 ms) by cccam.dyndns.org (P/2/2/2)
the newcamd server just fails but they say I am connected
vix 3.808 image
2014/03/05 12:34:30 77200830 p NewcamdRemote1 [newcamd] disconnected: reason login error1
2014/03/05 12:34:30 7720D7B0 c anonymous (0963&000000/FFFF/0EDA/84:38029638F47F8E9184F96539D75A03CD): found (180 ms) by cccam.dyndns.org (P/2/2/2)
2014/03/05 12:34:38 77200830 p NewcamdRemote1 [newcamd] connecting to newcamd.tv:8990
2014/03/05 12:34:38 77200830 p login failed for user 'user'
2014/03/05 12:34:38 77200830 p NewcamdRemote1 [newcamd] disconnected: reason login error1
2014/03/05 12:34:38 7720D7B0 c anonymous (0963&000000/FFFF/0EDA/84:236522C5B17DE96F0214A445FD9E83E5): found (180 ms) by cccam.dyndns.org (P/2/2/2)
the newcamd server just fails but they say I am connected
vix 3.808 image
Last edited by a moderator:
oscam.conf setup to use port 10000
nothing else is using that port except mgcamd
[global]
logfile = stdout
disablelog = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
dropdups = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[newcamd]
port = 10000@0963:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
oscam.user
user = user
pwd = pass
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
keepalive = 1
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.1.28 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
restart both oscam and mgcamd
better still reboot both
nothing else is using that port except mgcamd
[global]
logfile = stdout
disablelog = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
dropdups = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[newcamd]
port = 10000@0963:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
oscam.user
user = user
pwd = pass
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
keepalive = 1
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.1.28 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
restart both oscam and mgcamd
better still reboot both
go to usr/bin
rename cccam
to cccam.bak
reboot and try again
if your using ubuntu
/usr/local/bin
rename CCcam.x86
to CCcam.x86.bak
kill it first before rename in a terminal with
sudo -i
password
killall CCcam.x86
rename cccam
to cccam.bak
reboot and try again
if your using ubuntu
/usr/local/bin
rename CCcam.x86
to CCcam.x86.bak
kill it first before rename in a terminal with
sudo -i
password
killall CCcam.x86
Last edited:
edogg
Inactive User
- Joined
- Feb 24, 2006
- Messages
- 4,055
- Reaction score
- 723
cccam is in usr/softcams with oscam and mgcamd I cant reboot at the moment cus the missus is watching doctors I just dont understand why the newcamd is not able to login it was working when i first got the solo2 I just ftp'd all the same stuff from my duo which is still working
you want oscam to read the card from your ? where ever
then you have mgcamd on your solo2
stop cccam from running from where it is installed by renaming it .bak
that will stop cccam from reading your card/line
give oscam.conf a port that is not being used
oscam.user user pass
give newcamd.list
the
CWS = 192.168.1.28 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
restart both cams
if it dont work then your cfg are wrong or something else is using that port
then you have mgcamd on your solo2
stop cccam from running from where it is installed by renaming it .bak
that will stop cccam from reading your card/line
give oscam.conf a port that is not being used
oscam.user user pass
give newcamd.list
the
CWS = 192.168.1.28 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
restart both cams
if it dont work then your cfg are wrong or something else is using that port
oscam is reading the card
i just set up both cccam and mgcamd
in oscam.conf like this as a test
both use different ports
and i can select which cam on the solo2 i want to use
both are working fine
mgcamd port 10000 to newcamd.list
cccam port 10002 to cccam.cfg
[newcamd]
port = 10000@0963:000000;10002@0963:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
cccam cfg
looks like this
N: 127.0.0.1 10002 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
newcamd.list
like this
CWS = 192.168.1.28 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
all on the same lan
notice i dont use 127.0.0.1 twice
i just set up both cccam and mgcamd
in oscam.conf like this as a test
both use different ports
and i can select which cam on the solo2 i want to use
both are working fine
mgcamd port 10000 to newcamd.list
cccam port 10002 to cccam.cfg
[newcamd]
port = 10000@0963:000000;10002@0963:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
cccam cfg
looks like this
N: 127.0.0.1 10002 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
newcamd.list
like this
CWS = 192.168.1.28 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
all on the same lan
notice i dont use 127.0.0.1 twice
Last edited:
